MSD Sheet

Lucas Heavy Duty Oil Stabilizer
[Stock #10001 & 10002]
DIVISION AND LOCATION: SECTION I
Division: Lucas Oil Products, Inc., 302 N. Sheridan St., Corona, CA
92880 Emergency Telephone Number: 800-342-2512
CHEMICAL AND PHYSICAL PROPERTIES: SECTION II
Chemical Name: Petroleum hydrocarbon plus additives
Formula: N/A
Hazardous Decomposition Products: Carbon monoxide and carbon dioxide from burning. Oxides from burning. Oxides of
phosphorous from burning. Oxides of sulphur.
Incompatibility (keep away from): Strong oxidizers such as
hydrogen peroxide, bromine, and chromic acid.
Toxic and Hazardous Ingredients: None
Form: Liquid Odor: Petroleum Appearance: Liquid Color: Light Brown
Specific Gravity (water = 1): .89
Boiling Point: Greater than 371° C (700° F)
Melting Point: -18° C (0° F)
Solubility in Water (by weight %): -0- @ 20° C
Volatile (by weight %): -0-
Evaporation Rate: -0-
Vapor Pressure (mm Hg @ 20° C): -0-
Vapor Density (air = 1): N/A
pH (as is): N/A
Stability: Product is stable under normal conditions
Viscosity cSt @ 100° C: Greater than or = to 100
FIRE AND EXPLOSION DATA: SECTION III
Special Fire Fighting Procedures (air): Do not use water except as fog
Unusual Fire and Explosion Hazards: None
Flashpoint: (Method Used) Cleveland open cup -greater than 204° C (399° F)
Flammable Limits%: N/A
Extinguishing Agent: Dry chemical, Waterfog, CO2 or Foam
HEALTH HAZARD DATA: SECTION IV
Permissible Concentrations (air): If used in applications where a mist may be generated, observe a TWA/PEL of 5 mg/m3 for
mineral oil mist (OSHA and ACGIH).
Chronic Effects of Over-Exposure: Prolonged or repeated skin contact may cause dermatitis (skin irritation).
Acute Toxicological Properties: No data available.
Emergency First Aid Procedures:
Eyes - Flush with large amounts of water for a least 15 minutes. If irritation persists, call a physician.
Skin: Remove excess with cloth or paper. Wash thoroughly with soap and water.
Inhalation - Remove victim to fresh air. Call a physician.
Ingestion - Contact a physician immediately.
SPECIAL PROTECTION INFORMATION: SECTION V
Ventilation type required (local, mechanical, special): None
Respiratory protection (specify type): None
Protective gloves: Neoprene type.
Eye protection: Chemical safety goggles.
Other protective equipment:
None HANDLING OF SPILLS OF LEAKS: SECTION VI
Procedures for Clean-Up: Transfer bulk of mixture into another container.
Absorb residue with an inert material such as earth, sand, or vermiculite.
Sweep up and dispose as solid waste in accordance with local, state, and
federal regulations.
Waste Disposal: Dispose of in accordance with all applicable federal, state and local regulations.
SPECIAL PRECAUTIONS: SECTION VII
Precautions to be taken in handling and storage: Do not handle or store at temperatures over..........
Maximum Storage Temperature: 66° C (150° F)
TRANSPORTATION DATA: SECTION VIII
D.O.T: Not regulated
Reportable Quantity: N/A
Freight Classification: Petroleum lubricating oil
Special Transportation Notes: None
Prepared By: Dell Findley Title: Lab Technician Original Date: July 1, 1994

We believe the statements, technical information, and recommendations contained herein are reliable, but they are givenwithout warranty or guarantee of any kind, express or implied, and we assume no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.


Lucas Fuel Treatment
[Stock #10003,10013]

DIVISION AND LOCATION --- SECTION I

Division: Lucas Oil Products, Inc., 13365 Estelle Street, Corona, CA 91719

Emergency Telephone Number: 909-270-0154


CHEMICAL AND PHYSICAL PROPERTIES --- SECTION II
Chemical Name: Petroleum hydrocarbon plus additives.

Formula: N/A

Hazardous Decomposition Products: Carbon monoxide and carbon dioxide from burning. Oxides from burning. Oxides of phosphorous from burning. Oxides of sulphur.

Incompatibility (keep away from): Strong oxidizers such as hydrogen peroxide, bromine, and chromic acid.

Toxic and Hazardous Ingredients: None

Form: Liquid

Odor: Petroleum

Appearance: Liquid

Color: Light amber

Specific Gravity (water = 1): .89

Boiling Point: Greater than 371° C (700° F)

Melting Point: -18° C (0° F)

Solubility in Water (by weight %): -0- @ 20° C.

Volatile (by weight %): -0-

Evaporation Rate: -0-

Vapor Pressure (mm Hg @ 20° C): -0-

Vapor Density (air = 1): N/A

pH (as is): N/A

Stability: Product is stable under normal conditions

Viscosity cSt @ 100 degrees C: Greater than or = to 110


FIRE AND EXPLOSION DATA --- SECTION III
Special Fire Fighting Procedures (air): Do not use water except as fog

Unusual Fire and Explosion Hazards: None

Flashpoint: (Method Used) Cleveland open cup - greater than 204° C (399° F)

Flammable Limits%: N/A

Extinguishing Agent: Dry chemical, Waterfog, CO 2 or Foam. Closed containers exposed to fire may be cooled with water.


HEALTH HAZARD DATA --- SECTION IV
Permissible Concentrations (air): If used in applications where a mist may be generated, observe a TWA/PEL of 5 mg/m3 for mineral oil mist (OSHA and ACGIH).

Chronic Effects of Over-Exposure: Prolonged or repeated skin contact may cause dermatitis (skin irritation).

Acute Toxicological Properties: No data available.

Emergency First Aid Procedures:

Eyes - Flush with large amounts of water for a least 15 minutes. If irritation persists, call a physician.

Skin - Remove excess with cloth or paper. Wash thoroughly with soap and water.

Inhalation - Remove victim to fresh air. Call a physician.

Ingestion - Contact a physician immediately.


SPECIAL PROTECTION INFORMATION --- SECTION V
Ventilation type required (local, mechanical, special): None

Respiratory protection (specify type): None

Protective gloves: Neoprene type.

Eye protection: Chemical safety goggles.

Other protective equipment: None


HANDLING OF SPILLS OF LEAKS --- SECTION VI
Procedures for Clean-Up: Transfer bulk of mixture into another container. Absorb residue with an inert material such as earth, sand, or vermiculite. Sweep up and dispose as solid waste in accordance with local, state, and federal regulations.

Waste Disposal: Dispose of in accordance with all applicable federal, state and local regulations.


SPECIAL PRECAUTIONS --- SECTION VII
Precautions to be taken in handling and storage: Do not handle or store at temperatures over..........

Maximum Storage Temperature: 100° C (212° F).


TRANSPORTATION DATA --- SECTION VIII
D.O.T: Not regulated

Reportable Quantity: N/A

Freight Classification: Petroleum lubricating oil.

Special Transportation Notes: None


Prepared By: Dell Findley
Title: Lab Technician
Original Date: July 1, 1994

We believe the statements, technical information, and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assume no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.

Lucas Gun Oil
[Stock #10006]

DIVISION AND LOCATION --- SECTION I

Division: Lucas Oil Products, Inc., 13365 Estelle Street, Corona, CA 91719

Emergency Telephone Number: 800-342-2512


CHEMICAL AND PHYSICAL PROPERTIES --- SECTION II
Chemical Name: Petroleum hydrocarbon plus additives.

Formula: N/A

Hazardous Decomposition Products: Carbon monoxide and carbon dioxide from burning. Oxides of phosphorous from burning. Oxides of sulfur.

Incompatibility (keep away from): Strong oxidizers such as hydrogen peroxide, bromine, and chromic acid.

Toxic and Hazardous Ingredients: None

Form: Liquid

Odor: Petroleum

Appearance: Liquid

Color: Red

Specific Gravity (water = 1): .89

Boiling Point: Greater than 371° C (700° F)

Melting Point: -18° C (0° F).

Solubility in Water (by weight %: -0- @ 20° C

Volatile (by weight %): -0-

Evaporation Rate: -0-

Vapor Pressure (mm Hg @ 20° C): -0-

Vapor Density (air = 1): N/A

pH (as is): N/A

Stability: Product is stable under normal conditions.

Viscosity cSt @ 100° C: greater than 7.0.


FIRE AND EXPLOSION DATA --- SECTION III
Special Fire Fighting Procedures: Do not use water except as fog.

Unusual Fire and Explosion Hazards: NONE

Flashpoint: (Method used) Cleveland open cup - greater than 204° C (399° F)

Flammable Limits %: N/A

Extinguishing agent: Dry chemical, Waterfog, CO2, or Foam. Closed containers exposed to fire may be cooled with water.


HEALTH HAZARD DATA --- SECTION IV
Permissible Concentrations (air): If used in applications where a mist may be generated, observe a TWA/PEL of 5 mg/m3 for mineral oil mist (OSHA and ACGIH).

Chronic Effects of Over-Exposure: Prolonged or repeated skin contact may cause dermatitis (skin irritation).

Acute Toxicological Properties: No data available.

Emergency First Aid Procedures:

Eyes - Flush with large amounts of water for at lease 15 minutes. If irritation persists, call a physician.

Skin - Remove excess with cloth or paper. Wash thoroughly with soap and water.

Inhalation - Remove victim to fresh air. Call a physician.

If Swallowed - Contact a physician immediately.


SPECIAL PROTECTION INFORMATION --- SECTION V
Ventilation type required (local, mechanical, special): NONE

Respiratory protection (specify type): NONE

Protective gloves: Neoprene type

Eye protection: Chemical safety goggles

Other protective equipment: None


HANDLING OF SPILLS OF LEAKS --- SECTION VI
Procedures for Clean-Up: Transfer bulk of mixture into another container. Absorb residue with an inert material such as earth, sand, or vermiculite. Sweep up and dispose as solid waste in accordance with local, state, and federal regulations.

Waste Disposal: Dispose of in accordance with all applicable federal, state, and local regulations.


SPECIAL PRECAUTIONS --- SECTION VII
Precautions to be taken in handling and storage: Do not handle or store at temperatures over.....

Maximum Storage Temperature: 66° C (150° F)


TRANSPORTATION DATA --- SECTION VIII
D.O.T.: Not regulated.

Reportable Quantity: N/A

Freight Classification: Petroleum lubricating oil.

Special Transportation Notes: None


Prepared By: Dell Findley
Title: Lab Technician
Original Date: July 1, 1994

We believe the statements, technical information, and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assume no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.

Lucas Power Steering Stop Leak
[Stock #10008/#10011]

DIVISION AND LOCATION --- SECTION I

Division: Lucas Oil Products, Inc.., 13365 Estelle Street, Corona, CA 91719

Emergency Telephone Number: 800-342-2512


CHEMICAL AND PHYSICAL PROPERTIES --- SECTION II
Chemical Name: Petroleum hydrocarbon plus additives.

Formula: N/A

Hazardous Decomposition Products: Carbon monoxide and carbon dioxide from burning.Oxides of phosphorous from burning. Oxides of sulfur.

Incompatibility (keep away from): Strong oxidizers such as hydrogen peroxide, bromine, and chromic acid.

Toxic and Hazardous Ingredients: None

Form: Liquid

Odor: Petroleum

Appearance: Liquid

Color: Red

Specific Gravity (water = 1): .89

Boiling Point: Greater than 371° C (700° F)

Melting Point: -18° C (0° F)

Solubility in Water (by weight %): -0- @ 20° C.

Volatile (by weight %): -0-

Evaporation Rate: -0-

Vapor Pressure (mm Hg @ 20 degrees C): -0-

Vapor Density (air = 1): N/A

pH (as is): N/A

Stability: Product is stable under normal conditions.

Viscosity cSt @ 100° C: greater than 60.


FIRE AND EXPLOSION DATA --- SECTION III
Special Fire Fighting Procedures: Do not use water except as fog.

Unusual Fire and Explosion Hazards: None

Flashpoint: (Method used) Cleveland open cup - greater than 204° C (399° F)

Flammable Limits %: N/A

Extinguishing agent: Dry chemical, Waterfog, CO2, or Foam. Closed containers exposed to fire may be cooled with water.


HEALTH HAZARD DATA --- SECTION IV
Permissible Concentrations (air): If used in applications where a mist may be generated, observe a TWA/PEL of 5 mg/m3 for mineral oil mist (OSHA and ACGIH).

Chronic Effects of Over-Exposure: Prolonged or repeated skin contact may cause dermatitis (skin irritation).

Acute Toxicological Properties: No data available.

Emergency First Aid Procedures:

Eyes - Flush with large amounts of water for at lease 15 minutes. If irritation persists, call a physician.

Skin - Remove excess with cloth or paper. Wash thoroughly with soap and water.

Inhalation - Remove victim to fresh air. Call a physician.

If Swallowed - Contact a physician immediately.


SPECIAL PROTECTION INFORMATION --- SECTION V
Ventilation type required (local, mechanical, special): None

Respiratory protection (specify type): None

Protective gloves: Neoprene type

Eye protection: Chemical safety goggles

Other protective equipment: None


HANDLING OF SPILLS OF LEAKS --- SECTION VI
Procedures for Clean-Up: Transfer bulk of mixture into another container. Absorb residue with an inert material such as earth, sand, or vermiculite. Sweep up and dispose as solid waste in accordance with local, state, and federal regulations.

Waste Disposal: Dispose of in accordance with all applicable federal, state, and local regulations.


SPECIAL PRECAUTIONS --- SECTION VII
Precautions to be taken in handling and storage: Do not handle or store at temperatures over.....

Maximum Storage Temperature: 66° C (150° F).


TRANSPORTATION DATA --- SECTION VIII
D.O.T.: Not regulated.

Reportable Quantity: N/A

Freight Classification: Petroleum lubricating oil.

Special Transportation Notes: None


Prepared By: Dell Findley
Title: Lab Technician
Original Date: July 1, 1994

We believe the statements, technical information, and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assume no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.

Lucas Transmission Fix
[Stock #10009]

DIVISION AND LOCATION --- SECTION I

Division: Lucas Oil Products, Inc., 13365 Estelle Street, Corona, CA 91719

Emergency Telephone Number: 800-342-2512


CHEMICAL AND PHYSICAL PROPERTIES --- SECTION II
Chemical Name: Petroleum hydrocarbon plus additives.

Formula: N/A

Hazardous Decomposition Products: Carbon monoxide and carbon dioxide from burning. Oxides of phosphorous from burning. Oxides of sulfur.

Incompatibility (keep away from): Strong oxidizers such as hydrogen peroxide, bromine, and chromic acid.

Toxic and Hazardous Ingredients: None

Form: Liquid

Odor: Petroleum

Appearance: Liquid

Color: Red

Specific Gravity (water = 1): .89

Boiling Point: Greater than 371° C (700° F).

Melting Point: -18° C (0° F).

Solubility in Water (by weight %): -0- @ 20° degrees C.

Volatile (by weight %): -0-

Evaporation Rate: -0-

Vapor Pressure (mm Hg @ 20° C): -0-

Vapor Density (air = 1): N/A

pH (as is): N/A

Stability: Product is stable under normal conditions.

Viscosity cSt @ 100° C: greater than 60.


FIRE AND EXPLOSION DATA --- SECTION III
Special Fire Fighting Procedures: Do not use water except as fog.

Unusual Fire and Explosion Hazards: None

Flashpoint: (Method used) Cleveland open cup - greater than 204° C (399 degrees F).

Flammable Limits %: N/A

Extinguishing agent: Dry chemical, Waterfog, CO2, or Foam. Closed containers exposed to fire may be cooled with water.


HEALTH HAZARD DATA --- SECTION IV
Permissible Concentrations (air): If used in applications where a mist may be generated, observe a TWA/PEL of 5 mg/m3 for mineral oil mist (OSHA and ACGIH).

Chronic Effects of Over-Exposure: Prolonged or repeated skin contact may cause dermatitis (skin irritation).

Acute Toxicological Properties: No data available.

Emergency First Aid Procedures:

Eyes - Flush with large amounts of water for at lease 15 minutes. If irritation persists, call a physician.

Skin - Remove excess with cloth or paper. Wash thoroughly with soap and water.

Inhalation - Remove victim to fresh air. Call a physician.

If Swallowed - Contact a physician immediately.


SPECIAL PROTECTION INFORMATION --- SECTION V
Ventilation type required (local, mechanical, special): None

Respiratory protection (specify type): None

Protective gloves: Neoprene type.

Eye protection: Chemical safety goggles.

Other protective equipment: None


HANDLING OF SPILLS OF LEAKS --- SECTION VI
Procedures for Clean-Up: Transfer bulk of mixture into another container. Absorb residue with an inert material such as earth, sand, or vermiculite. Sweep up and dispose as solid waste in accordance with local, state, and federal regulations.

Waste Disposal: Dispose of in accordance with all applicable federal, state, and local regulations.


SPECIAL PRECAUTIONS --- SECTION VII
Precautions to be taken in handling and storage: Do not handle or store at temperatures over.....

Maximum Storage Temperature: 66° C (150° F).


TRANSPORTATION DATA --- SECTION VIII
D.O.T.: Not regulated.

Reportable Quantity: N/A

Freight Classification: Petroleum lubricating oil.

Special Transportation Notes: None


Prepared By: Dell Findley
Title: Lab Technician
Original Date: July 1, 1994

We believe the statements, technical information, and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assume no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.

Lucas Chain Lubricant
[Stock #10014]

DIVISION AND LOCATION --- SECTION I

Division: Lucas Oil Products, Inc., 13365 Estelle Street, Corona, CA 91719

Emergency Telephone Number: 800-342-2512


CHEMICAL AND PHYSICAL PROPERTIES --- SECTION II
Chemical Name: Petroleum hydrocarbon plus additives.

Formula: Proprietary information.

Components: Solvent dewaxed residual oil, molybdenum disulfide.

Hazardous Components: Oil mist if generated.

Appearance: Liquid

Color: Dark brown

Odor: Characteristic petroleum

Vapor Density (air = 1 ATM): Greater than air.

Boiling Point: > 500° F

Viscosity cSt @ 100° C: Greater than or equal to 60.0.

Density: 7.587 pounds/gallon.

Specific Gravity @ 60° F: .9111

Solubility in Water: Negligible @ 25° C.

Stability: Stable under normal conditions of storage and handling.

Incompatibility: Avoid contact with strong oxidizing agents.


FIRE AND EXPLOSION DATA --- SECTION III
Fire Fighting Procedures: Use dry chemical, carbon dioxide, halon, foam or water spray.

Flash Point: COC = 400° F.

Hazardous Decomposition Products: Combustion may yield fumes, smoke, carbon monoxide, oxides of molybdenum, carbon, phosphorus and sulphur.


HEALTH HAZARD DATA --- SECTION IV
Chronic Effects of Over-Exposure: Harmful if inhaled - avoid breathing oil mist.

Acute Toxicological Properties: No data available.

Emergency First Aid Procedures:

Eyes - Eye irritant, may cause stinging, watering, redness, swelling: flush with large amounts of water.

Frequent or Prolonged Skin Contact - May cause irritation. Remove soiled clothing and wash skin with mild soap & water.

Inhalation - Remove exposed person to fresh air. If respiratory symptoms develop seek medical attention.

Ingestion - Do not induce vomiting. If conscious, give milk or water and seek medical attention.


SPECIAL PROTECTION INFORMATION --- SECTION V
Ventilation Required: None if airborne concentration minimal.

Respiratory Protection: None if not exposed to mist.

Gloves/Glasses: Use impermeable gloves and safety goggles for repeated exposure or hot handling.


HANDLING OF SPILLS OR LEAKS --- SECTION VI
Spill Control Measure: Eliminate sources of ignition. Prevent additional discharge of material, if possible to do so safely. Contain and/or clean up with sand or earth on land - skimming absorbent on water.

Waste Disposal: Dispose of in accordance with all applicable federal, state, and local regulations. Wear personal protective equipment - gloves, goggles, etc.


SPECIAL PRECAUTIONS --- SECTION VII
Handling and Storage: Keep containers tightly closed. Store in cool, well ventilated place, away from heat and/or incompatible materials.


TRANSPORTATION DATA --- SECTION VIII
D.O.T.: Not regulated.

Freight Classification: Petroleum lubricating oil.


ENVIRONMENTAL/SAFETY REGULATIONS
None


Prepared By: Dell Findley
Title: Lab Technician
Original Date: July 15, 1995

We believe the statements, technical information, and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assume no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.

Lucas Universal Hydraulic Fluid
[Stock #10017]

DIVISION AND LOCATION --- SECTION I

Division: Lucas Oil Products, Inc., 13365 Estelle Street, Corona, CA 91719

Emergency Telephone Number: 800-342-2512


CHEMICAL AND PHYSICAL PROPERTIES --- SECTION II
Chemical Name: Petroleum hydrocarbon plus additives.

Formula: Proprietary information

Hazardous Decomposition Products: Oil mist - if generated, solvent dewaxed distillate, and heavy paraffin.

Toxic and Hazardous Ingredients: None

Odor: Petroleum

Appearance: Liquid

Color: Lt. Amber

Specific Gravity @ 60°F: .8888

Specific Gravity of Vapor: @ 1 ATM (Air=1) Greater than air

Boiling Point: > 500°F

Melting Point: Not applicable.

Solubility in Water (by weight %: Negligible @ 25°C.

Stability: Product is stable under normal conditions of storage and handling.

Incompatibility: Avoid contact with acids and strong oxidizing agents.

Viscosity: cSt @ 100°C - Greater than or equal to 9.0.


FIRE AND EXPLOSION DATA --- SECTION III
Special Fire Fighting Procedures: Use dry chemical, foam or water spray.

Hazardous combustion products: Fumes, smoke and carbon monoxide. Toxic gases will form upon combustion.

Flashpoint: (Method used) Cleveland open cup - 350 degrees F

Extinguishing agent: Dry chemical or Waterfog or CO 2 or Foam or Sand/Earth. Water may cause frothing. Closed containers exposed to fire may be cooled with water.


HEALTH HAZARD DATA --- SECTION IV
Chronic Effects of Over-Exposure: Harmful if inhaled - avoid breathing oil mist.

Acute Toxicological Properties: No data available

Emergency First Aid Procedures:

Eyes - Slightly irritating - flush with large amounts of water.

Skin - Prolonged or repeated contact may cause skin irritation/dermatitis. Immediately remove soiled clothing and wash skin with soap and water.

Inhalation - Remove exposed person to fresh air if adverse effects are observed.

If Swallowed - Do not induce vomiting - if conscious give two glasses of water and get medical attention.


SPECIAL PROTECTION INFORMATION --- SECTION V
Ventilation type required (local, mechanical, special): None

Respiratory protection (specify type): None

Protective gloves: None

Eye protection: Chemical safety goggles and, if handled hot, full face shield

Other protective equipment: None


HANDLING OF SPILLS OF LEAKS --- SECTION VI
Spill Control Measures: Eliminate sources of ignition. Prevent additional discharge of material, if possible to do so safely. Contain and/or clean up with sand or earth on land - skimming absorbents on water.

Waste Disposal: Dispose of in accordance with all applicable federal, state, and local regulations. Wear personal protective equipment - gloves, goggles, etc.


SPECIAL PRECAUTIONS --- SECTION VII
Precautions to be taken in handling and storage: Keep container closed until ready for use.


TRANSPORTATION DATA --- SECTION VIII
D.O.T.: Not regulated

Reportable Quantity: Not applicable

Freight Classification: Petroleum Lubricating Oil

Special Transportation Notes: None


ENVIRONMENTAL/SAFETY REGULATIONS --- SECTION IX
Section 313 (Title III Superfund Amendment and Reauthorization Act): This product does not contain any chemical subject to the reporting requirements of Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372.


Prepared By: Dell Findley
Title: Lab Technician
Original Date: May 1, 1995

We believe the statements, technical information, and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assume no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.

Lucas Hydraulic Oil Booster and Stop Leak
[Stock #10018]

DIVISION AND LOCATION --- SECTION I

Division: Lucas Oil Products, Inc., 13365 Estelle Street, Corona, CA 91719

Emergency Telephone Number: 800-342-2512


CHEMICAL AND PHYSICAL PROPERTIES --- SECTION II
Chemical Name: Petroleum hydrocarbon plus additives.

Formula: N/A

Hazardous Decomposition Products: Carbon monoxide and carbon dioxide from burning. Oxides of sulphur.

Incompatibility (keep away from): Strong oxidizers such as hydrogen peroxide, bromine and chromic acid.

Toxic and Hazardous Ingredients: None

Form: Liquid

Odor: Petroleum

Appearance: Liquid

Color: Red

Specific Gravity (water = 1): .9254

Boiling Point: Greater than 371°C (700°F)

Melting Point: -18°C (0°F)

Solubility in Water (by weight %): -0- @ 20°C

Volatile (by weight %): -0-

Evaporation Rate: -0-

Vapor Pressure (mm Hg @ 20°C): -0-

Vapor Density (air=1): N/A

pH (as is): N/A

Stability: Product is stable under normal conditions.

Viscosity cSt @ 100°C: Greater than 40.0


FIRE AND EXPLOSION DATA --- SECTION III
Special Fire Fighting Procedures: Do not use water except as fog.

Unusual Fire and Explosion Hazards: None

Flashpoint: (Method Used) Cleveland open cup - greater than 177°C (350°F).

Flammable Limits %: N/A

Extinguishing Agent: Dry chemical, waterfog, CO 2, or Foam. Closed containers exposed to fire may be cooled with water.


HEALTH HAZARD DATA --- SECTION IV
Permissible Concentrations (air): If used in applications where a mist may be generated, observe a TWA/PEL of 5 mg/m3 for mineral oil mist (OSHA and ACGIH).

Chronic Effects of Over-Exposure: Prolonged or repeated skin contact may cause dermatitis (skin irritation).

Acute Toxicological Properties: No data available.

Emergency Fir Aid Procedures:

Eyes - Flush with large amounts of water for at least 15 minutes. If irritation persists, call a physician.

Skin - Remove excess with cloth or paper. Wash thoroughly with soap and water.

Ingested - Contact a physician immediately.


SPECIAL PROTECTION INFORMATION --- SECTION V
Ventilation Type Required (local, mechanical, special): None

Respiratory Protection (specify type): None

Protective Gloves: Neoprene type

Eye Protection: Chemical safety goggles.

Other Protective Equipment: None


HANDLING OF SPILLS AND LEAKS --- SECTION VI
Procedures For Clean-Up: Transfer bulk of mixture into another container. Absorb residue with an inert material such as earth, sand, or vermiculite. Sweep up and dispose of as solid waste in accordance with local, state and federal regulations.

Waste Disposal: Dispose of in accordance with all applicable federal, state and local regulations.


SPECIAL PRECAUTIONS --- SECTION VII
Precautions To Be Taken In Handling And Storage: Do not handle or store at temperatures over.....

Maximum Storage Temperature: 66°C (150°F).


TRANSPORTATION DATA --- SECTION VIII
D.O.T.: Not regulated.

Reportable Quantity: N/A

Freight Classification: Petroleum lubricating oil.

Special Transportation Note: None


Prepared By: Dell Findley
Title: Lab Technician
Original Date: July 1, 1994

We believe the statements, technical information and recommendations contained herein are reliable but they are given without warranty or guarantee of any kind, express or implied, and we assume no responsibility for any loss, damage or expense, direct or consequential, arising out of their use.

Lucas Extreme Cold Weather Fuel Treatment
[Stock #10021]

DIVISION AND LOCATION --- SECTION I

Division: Lucas Oil Products, Inc., 13365 Estelle Street, Corona, CA 91719

Emergency Telephone Number: 800-342-2512


CHEMICAL AND PHYSICAL PROPERTIES --- SECTION II
Chemical Name: Petroleum hydrocarbon plus additives.

Formula: N/A

Hazardous Decomposition Products:

Fumes and smoke. Carbon monoxide and carbon dioxide from burning. Oxides of phosphorous from burning. Oxides of sulfur.

Incompatibility (keep away from): Strong oxidizers such as hydrogen peroxide, bromine, and chromic acid. Toxic and Hazardous Ingredients: Ethylene and vinyl acetate in heavy aromatic Naphtha.

Form: Liquid

Odor: Petroleum plus additive - slight odor.

Appearance: Liquid

Color: Clear yellow.

Specific Gravity (water = 1): .89

Boiling Point: Greater than 316°C (600°F)

Freezing/Melting Point: Less than ambient.

Solubility in Water (by weight %): -0- @ 20°C

Volatile (by weight %): -0-

Evaporation Rate: -0-

Vapor Pressure (mm Hg @ 20°C): -0-

Vapor Density (air = 1): N/A

pH (as is): N/A

Stability: Product is stable under normal conditions.

Viscosity cSt @ 100°C: greater than 9.0.


FIRE AND EXPLOSION DATA --- SECTION III
Special Fire Fighting Procedures: Do not use water except as fog.

Unusual Fire and Explosion Hazards: Combustible liquid. Can form combustible mixtures at or above flashpoint. Toxic gases will form upon combustion.

Flash point: (Method used) Cleveland open cup - greater than 177°C (350°F).

Flammable Limits %: N/A

Extinguishing agent: Dry chemical, Waterfog, or Foam. Closed containers exposed to fire may be cooled with water.


HEALTH HAZARD DATA --- SECTION IV
Permissible Concentrations (air): If used in applications where a mist may be generated, observe a TWA/PEL of 5 mg/m3 for mineral oil mist (OSHA and ACGIH).

Chronic Effects of Over-Exposure: Prolonged or repeated skin contact may cause dermatitis (skin irritation). Skin contact may aggravate an existing dermatitis condition.

Acute Toxicological Properties: No data available.

Emergency First Aid Procedures:

Eyes - Slightly irritating but does not injure eye tissue. Flush with large amounts of water for at least 15 minutes. If irritation persists, call a physician.

Skin - Remove excess with cloth or paper. Wash thoroughly with soap and water.

Inhalation - Avoid breathing vapors. Remove victim to fresh air. Call a physician.

If Swallowed - Contact a physician immediately.


SPECIAL PROTECTION INFORMATION --- SECTION V
Ventilation type required (local, mechanical, special): Slight odor - use in open or well ventilated area.

Respiratory protection (specify type): None

Protective gloves: Neoprene type

Eye protection: Chemical safety goggles

Other protective equipment: None


HANDLING OF SPILLS OF LEAKS --- SECTION VI
Procedures for Clean-Up: Transfer bulk of mixture into another container. Absorb residue with an inert material such as earth, sand, or vermiculite. Sweep up and dispose as solid waste in accordance with local, state, and federal regulations.

Waste Disposal: Dispose of in accordance with all applicable federal, state, and local regulations.


SPECIAL PRECAUTIONS --- SECTION VII
Precautions to be taken in handling and storage: Do not handle or store at temperatures over.....66°C (150° F).

Maximum Storage Temperature: Same as above.


TRANSPORTATION DATA --- SECTION VIII
D.O.T.: Not regulated

Reportable Quantity: N/A

Freight Classification: Petroleum lubricating oil

Special Transportation Notes: None


Prepared By: Dell Findley

Title: Lab Technician

Original Date: October 1, 1994

We believe the statements, technical information, and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assume no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.

Lucas 5th Wheel & Slider Lube
[Stock #10030]

DIVISION AND LOCATION --- SECTION I

Division: Lucas Oil Products, Inc., 13365 Estelle Street, Corona, CA 91719

Emergency Telephone Number: 800-342-2512


CHEMICAL AND PHYSICAL PROPERTIES --- SECTION II
Chemical Name: Petroleum hydrocarbon plus additives.

Formula: N/A

Hazardous Decomposition Products: Carbon monoxide and carbon dioxide from burning. Oxides of phosphorous from burning. Oxides of sulfur.

Incompatibility (keep away from): Strong oxidizers such as hydrogen peroxide, bromine, and chromic acid.

Toxic and Hazardous Ingredients: None

Form: Liquid

Odor: Petroleum

Appearance: Liquid

Color: Dark Brown

Specific Gravity (water = 1): .89

Boiling Point: Greater than 371°C (700°F).

Melting Point: -18°C (0°F).

Solubility in Water (by weight %): -0- @ 20°C.

Volatile (by weight %): -0-

Evaporation Rate: -0-

Vapor Pressure (mm Hg @ 20°C): -0-

Vapor Density (air = 1): N/A

pH (as is): N/A

Stability: Product is stable under normal conditions

Viscosity cSt @ 100°C: greater than or = to 70.0.


FIRE AND EXPLOSION DATA --- SECTION III
Special Fire Fighting Procedures: Do not use water except as fog.

Unusual Fire and Explosion Hazards: None

Flashpoint: (Method used) Cleveland open cup - greater than 204°C (399°F).

Flammable Limits %: N/A

Extinguishing agent: Dry chemical, Waterfog, CO2, or Foam. Closed containers exposed to fire may be cooled with water.


HEALTH HAZARD DATA --- SECTION IV
Permissible Concentrations (air): If used in applications where a mist may be generated, observe a TWA/PEL of 5 mg/m3 for mineral oil mist (OSHA and ACGIH).

Chronic Effects of Over-Exposure: Prolonged or repeated skin contact may cause dermatitis (skin irritation).

Acute Toxicological Properties: No data available.

Emergency First Aid Procedures:

Eyes - Flush with large amounts of water for at lease 15 minutes. If irritation persists, call a physician.

Skin - Remove excess with cloth or paper. Wash thoroughly with soap and water.

Inhalation - Remove victim to fresh air. Call a physician.

If Swallowed - Contact a physician immediately.


SPECIAL PROTECTION INFORMATION --- SECTION V
Ventilation type required (local, mechanical, special): None

Respiratory protection (specify type): None

Protective gloves: Neoprene type

Eye protection: Chemical safety goggles

Other protective equipment: None


HANDLING OF SPILLS OF LEAKS --- SECTION VI
Procedures for Clean-Up: Transfer bulk of mixture into another container. Absorb residue with an inert material such as earth, sand, or vermiculite. Sweep up and dispose as solid waste in accordance with local, state, and federal regulations.

Waste Disposal: Dispose of in accordance with all applicable federal, state, and local regulations.


SPECIAL PRECAUTIONS --- SECTION VII
Precautions to be taken in handling and storage: Do not handle or store at temperatures over.....

Maximum Storage Temperature: 66°C (150°F).


TRANSPORTATION DATA --- SECTION VIII
D.O.T.: Not regulated

Reportable Quantity: N/A

Freight Classification: Petroleum lubricating oil

Special Transportation Notes: None


Prepared By: Dell Findley
Title: Lab Technician
Original Date: July 15, 1995

We believe the statements, technical information, and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assume no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.

Lucas Hub Oil
[Stock #10088]

DIVISION AND LOCATION --- SECTION I

Division: Lucas Oil Products, Inc., 13365 Estelle Street, Corona, CA 91719

Emergency Telephone Number: 800-342-2512


CHEMICAL AND PHYSICAL PROPERTIES --- SECTION II
Chemical Name: Petroleum hydrocarbon plus additives.

Formula: N/A

Hazardous Decomposition Products: Carbon monoxide and carbon dioxide from burning. Oxides of phosphorous from burning. Oxides of sulfur.

Incompatibility (keep away from): Strong oxidizers such as hydrogen peroxide, bromine, and chromic acid.

Toxic and Hazardous Ingredients: None

Form: Liquid

Odor: Petroleum

Appearance: Liquid

Color: Red

Specific Gravity (water = 1): .89

Boiling Point: Greater than 371°C (700°F)

Melting Point: -18°C (0°F).

Solubility in Water (by weight %): -0- @ 20°C.

Volatile (by weight %): -0-

Evaporation Rate: -0-

Vapor Pressure (mm Hg @ 20°C): -0-

Vapor Density (air = 1): N/A

pH (as is): N/A

Stability: Product is stable under normal conditions

Viscosity cSt @ 100°C: greater than 60.0.


FIRE AND EXPLOSION DATA --- SECTION III
Special Fire Fighting Procedures: Do not use water except as fog.

Unusual Fire and Explosion Hazards: None

Flashpoint: (Method used) Cleveland open cup - greater than 204°C (399°F).

Flammable Limits %: N/A

Extinguishing agent: Dry chemical, Waterfog, CO2, or Foam. Closed containers exposed to fire may be cooled with water.


HEALTH HAZARD DATA --- SECTION IV
Permissible Concentrations (air): If used in applications where a mist may be generated, observe a TWA/PEL of 5 mg/m3 for mineral oil mist . (OSHA and ACGIH)

Chronic Effects of Over-Exposure: Prolonged or repeated skin contact may cause dermatitis (skin irritation)

Acute Toxicological Properties: No data available

Emergency First Aid Procedures:

Eyes - Flush with large amounts of water for at lease 15 minutes. If irritation persists, call a physician.

Skin - Remove excess with cloth or paper. Wash thoroughly with soap and water.

Inhalation - Remove victim to fresh air. Call a physician.

If Swallowed - Contact a physician immediately.


SPECIAL PROTECTION INFORMATION --- SECTION V
Ventilation type required (local, mechanical, special): None

Ventilation type required (local, mechanical, special): None

Respiratory protection (specify type): None

Protective gloves: Neoprene type

Eye protection: Chemical safety goggles

Other protective equipment: None

Respiratory protection (specify type): None

Protective gloves: Neoprene type

Eye protection: Chemical safety goggles

Other protective equipment: None


HANDLING OF SPILLS OF LEAKS --- SECTION VI
Procedures for Clean-Up: Transfer bulk of mixture into another container. Absorb residue with an inert material such as earth, sand, or vermiculite. Sweep up and dispose as solid waste in accordance with local, state, and federal regulations.

Waste Disposal: Dispose of in accordance with all applicable federal, state, and local regulations.


SPECIAL PRECAUTIONS --- SECTION VII
Precautions to be taken in handling and storage: Do not handle or store at temperatures over.....

Maximum Storage Temperature: 66°C (150°F).


TRANSPORTATION DATA --- SECTION VIII
D.O.T.: Not regulated

Reportable Quantity: N/A

Freight Classification: Petroleum lubricating oil

Special Transportation Notes: None


Prepared By: Dell Findley
Title: Lab Technician
Original Date: July 1, 1994

We believe the statements, technical information, and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assume no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.

Lucas Tool Box Buddy
[Stock #10200, 10216 & 10070]

DIVISION AND LOCATION --- SECTION I

Division: Lucas Oil Products, Inc., 13365 Estelle Street, Corona, CA 91719

Emergency Telephone Number: 800-342-2512


CHEMICAL AND PHYSICAL PROPERTIES --- SECTION II
Chemical Name: Petroleum hydrocarbon plus additives.

Formula: N/A

Hazardous Decomposition Products: Carbon monoxide and carbon dioxide from burning. Oxides of phosphorous from burning. Oxides of sulfur.

Incompatibility (keep away from): Strong oxidizers such as hydrogen peroxide, bromine, and chromic acid.

Toxic and Hazardous Ingredients: None

Form: Liquid

Odor: Petroleum

Appearance: Liquid

Color: Lt Amber

Specific Gravity (water = 1): .89

Boiling Point: Greater than 371°C (700°F).

Melting Point: -18°C (0°F).

Solubility in Water (by weight %): -0- @ 20°C.

Volatile (by weight %): -0-

Evaporation Rate: -0-

Vapor Pressure (mm Hg @ 20°C): -0-

Vapor Density (air = 1): N/A

pH (as is): N/A

Stability: Product is stable under normal conditions.

Viscosity cSt @ 100°F: Greater than or = to 40


FIRE AND EXPLOSION DATA --- SECTION III
Special Fire Fighting Procedures: Do not use water except as fog.

Unusual Fire and Explosion Hazards: None

Flashpoint: (Method used) Cleveland open cup - greater than 204°C (399°F).

Flammable Limits %: N/A

Extinguishing agent: Dry chemical, Waterfog, CO2, or Foam. Closed containers exposed to fire may be cooled with water.


HEALTH HAZARD DATA --- SECTION IV
Permissible Concentrations (air): If used in applications where a mist may be generated, observe a TWA/PEL of 5 mg/m3 for mineral oil mist (OSHA and ACGIH)

Chronic Effects of Over-Exposure: Prolonged or repeated skin contact may cause dermatitis (skin irritation).

Acute Toxicological Properties: No data available.

Emergency First Aid Procedures:

Eyes - Flush with large amounts of water for at lease 15 minutes. If irritation persists, call a physician.

Skin - Remove excess with cloth or paper. Wash thoroughly with soap and water.

Inhalation - Remove victim to fresh air. Call a physician.

If Swallowed - Contact a physician immediately.


SPECIAL PROTECTION INFORMATION --- SECTION V
Ventilation type required (local, mechanical, special): None

Respiratory protection (specify type): None

Protective gloves: Neoprene type

Eye protection: Chemical safety goggles

Other protective equipment: None


HANDLING OF SPILLS OF LEAKS --- SECTION VI
Procedures for Clean-Up: Transfer bulk of mixture into another container. Absorb residue with an inert material such as earth, sand, or vermiculite. Sweep up and dispose as solid waste in accordance with local, state, and federal regulations.

Waste Disposal: Dispose of in accordance with all applicable federal, state, and local regulations.


SPECIAL PRECAUTIONS --- SECTION VII
Precautions to be taken in handling and storage: Do not handle or store at temperatures over.....

Maximum Storage Temperature: 65°C (150°F).


TRANSPORTATION DATA --- SECTION VIII
D.O.T.: Not regulated

Reportable Quantity: N/A

Freight Classification: Petroleum lubricating oil

Special Transportation Notes: None


Prepared By: Dell Findley
Title: Lab Technician
Original Date: July 1, 1994

We believe the statements, technical information, and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assume no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.

Lucas X-tra Heavy Duty Grease
[Stock #10301]

DIVISION AND LOCATION --- SECTION I

Division: Lucas Oil Products, Inc., 13365 Estelle Street, Corona, CA 91719

Emergency Telephone Number: 800-342-2512


CHEMICAL AND PHYSICAL PROPERTIES --- SECTION II
Chemical Name: Petroleum hydrocarbon plus additives.

Formula: N/A

Hazardous Decomposition Products: Ketones, Aldehydes, Oxides of sulfur, Oxides of nitrogen, Carbon monoxide and carbon dioxide from burning.

Incompatibility (keep away from): Strong oxidizers such as hydrogen peroxide, bromine, and chromic acid.

Toxic and Hazardous Ingredients: None

Form: Semi-solid

Odor: Mineral oil

Appearance: Grease

Color: Green

Specific Gravity (water = 1): .942

Melting Point: Not applicable

Solubility in Water (by weight %): Negligible at 25°C.

Stability: Product is stable under normal conditions


FIRE AND EXPLOSION DATA --- SECTION III
Special Fire Fighting Procedures: Dense smoke. Fire fighters should wear an approved self-contained breathing apparatus. Do not use water except as fog.

Unusual Fire and Explosion Hazards: Dense smoke.

Flashpoint: (Method used) Cleveland open cup - greater than 190°C (374°F).

Extinguishing agent: Dry chemical or Waterfog or CO 2 or Foam or Sand/Earth. Water may cause frothing. Closed containers exposed to fire may be cooled with water.


HEALTH HAZARD DATA --- SECTION IV
Chronic Effects of Over-Exposure: None when used with good personal hygiene practices. May otherwise cause skin and eye irritation upon prolonged or repeated contact.

Acute Toxicological Properties: No data available

Emergency First Aid Procedures:

Eyes - Flush with large amounts of water for at lease 15 minutes. If irritation persists, call a physician.

Skin - Remove excess with cloth or paper. Wash thoroughly with soap and water.

Inhalation - Remove exposed person to fresh air, if discomfort is experienced while handling hot product.

If Swallowed - Contact a physician immediately.


SPECIAL PROTECTION INFORMATION --- SECTION V
Ventilation type required (local, mechanical, special): None

Respiratory protection (specify type): None

Protective gloves: None

Eye protection: Chemical safety goggles and, if handled hot, full face shield.

Other protective equipment: None


HANDLING OF SPILLS OF LEAKS --- SECTION VI
Procedures for Clean-Up: Transfer bulk of mixture into another container. Absorb residue with an inert material such as earth, sand, or vermiculite. Sweep up and dispose as solid waste in accordance with local, state, and federal regulations.

Waste Disposal: Dispose of in accordance with all applicable federal, state, and local regulations.


SPECIAL PRECAUTIONS --- SECTION VII
Precautions to be taken in handling and storage: Keep container closed until ready for use.


TRANSPORTATION DATA --- SECTION VIII
D.O.T.: Not regulated

Reportable Quantity: Not applicable

Freight Classification: Petroleum Lubricating Grease

Special Transportation Notes: None


ENVIRONMENTAL/SAFETY REGULATIONS --- SECTION IX
Section 313 (Title III Superfund Amendment and Reauthorization Act): This product does not contain any chemical subject to the reporting requirements of Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372.


Prepared By: Dell Findley
Title: Lab Technician
Original Date: May 1, 1995

We believe the statements, technical information, and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assume no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.

Lucas 50wt PLUS Racing Oil
[Stock #10044]

DIVISION AND LOCATION --- SECTION I

Division: Lucas Oil Products, Inc., 13365 Estelle Street, Corona, CA 91719

Emergency Telephone Number: 800-342-2512


CHEMICAL AND PHYSICAL PROPERTIES --- SECTION II
Chemical Name: Petroleum hydrocarbon plus additives.

Formula: Proprietary information.

Components: Hydrotreated distillate, heavy paraffin, solvent dewaxed distillate, zinc, copper, calcium, and magnesium detergents.

Hazardous Components: Zinc, copper compounds. Oil mist if generated.

Appearance: Liquid

Color: Clear brown

Odor: Characteristic petroleum.

Vapor Density (air = 1 ATM): Greater than air.

Boiling Point: >500°F.

Viscosity cSt @ 100°C: Greater than or equal to 16.5

Density: 7.462 pounds/gallon

Specific Gravity @ 60°F: .8961

Solubility in Water: Negligible @ 25°C.

Stability: Stable under normal conditions of storage and handling.

Incompatibility: Avoid contact with strong oxidizing agents.


FIRE AND EXPLOSION DATA --- SECTION III
Fire Fighting Procedures: Use dry chemical, carbon dioxide, halon, foam or water spray.

Flash point: COC = 395°F.

Hazardous Decomposition Products: Combustion may yield fumes and smoke and oxides of carbon and oxides of nitrogen, phosphorus, sulphur, and zinc.


HEALTH HAZARD DATA --- SECTION IV
Chronic Effects of Over-Exposure: Harmful if inhaled - avoid breathing oil mist.

Acute Toxicological Properties: No data available.

Emergency First Aid Procedures:

Eyes - Eye irritant, may cause stinging, watering, redness, swelling: flush with large amounts of water. Frequent or Prolonged Skin Contact - May cause irritation. Remove soiled clothing and wash skin with mild soap & water.

Inhalation - Remove exposed person to fresh air. If respiratory symptoms develop seek medical attention.

Ingestion - Do not induce vomiting. If conscious, give milk or water and seek medical attention.


SPECIAL PROTECTION INFORMATION --- SECTION V
Ventilation Required: None if airborne concentration us minimal.

Respiratory Protection: None if not exposed to mist.

Gloves/Glasses: Use impermeable gloves and safety goggles for repeated exposure or hot handling.


HANDLING OF SPILLS OR LEAKS --- SECTION VI
Spill Control Measure: Eliminate sources of ignition. Prevent additional discharge of material, if possible to do so safely. Contain and/or clean up with sand or earth on land - skimming absorbent on water.

Waste Disposal: Dispose of in accordance with all applicable federal, state, and local regulations. Wear personal protective equipment - gloves, goggles, etc.


SPECIAL PRECAUTIONS --- SECTION VII
Handling and Storage: Keep containers tightly closed. Store in cool, well ventilated place, away from heat and/or incompatible materials.


TRANSPORTATION DATA --- SECTION VIII
D.O.T.: Not regulated.

Freight Classification: Petroleum lubricating oil.


ENVIRONMENTAL/SAFETY REGULATIONS
This material contains the following chemicals subject to the reporting requirements of SARA 313 and 40 CFR 372:

%Component Weight
Zinc Compound 1-2%
Copper Compound 0-1%


Prepared By: Dell Findley
Title: Lab Technician
Original Date: June 30, 1996

We believe the statements, technical information, and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assume no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.

Lucas Synthetic Racing 10w30
[Stock #10050]

DIVISION AND LOCATION --- SECTION I

Division: Lucas Oil Products, Inc., 302 N. Sheridan St., Corona, CA 92880

Emergency Telephone Number: 800-342-2512


CHEMICAL AND PHYSICAL PROPERTIES --- SECTION II
Chemical Name: Petroleum hydrocarbon plus additives.

Formula: Proprietary information.

Components: Hydrotreated distillate, heavy paraffin, solvent dewaxed distillate, zinc, copper, calcium, and magnesium detergents.

Hazardous Components: Zinc, copper compounds. Oil mist if generated.

Appearance: Liquid

Color: Clear brown

Odor: Characteristic petroleum.

Vapor Density (air = 1 ATM): Greater than air.

Boiling Point: >500°F.

Viscosity cSt @ 100°C: Greater than or equal to 16.5

Density: 7.462 pounds/gallon

Specific Gravity @ 60°F: .8961

Solubility in Water: Negligible @ 25°C.

Stability: Stable under normal conditions of storage and handling.

Incompatibility: Avoid contact with strong oxidizing agents.


FIRE AND EXPLOSION DATA --- SECTION III
Fire Fighting Procedures: Use dry chemical, carbon dioxide, halon, foam or water spray.

Flash point: COC = 395°F.

Hazardous Decomposition Products: Combustion may yield fumes and smoke and oxides of carbon and oxides of nitrogen, phosphorus, sulphur, and zinc.


HEALTH HAZARD DATA --- SECTION IV
Chronic Effects of Over-Exposure: Harmful if inhaled - avoid breathing oil mist.

Acute Toxicological Properties: No data available.

Emergency First Aid Procedures:

Eyes - Eye irritant, may cause stinging, watering, redness, swelling: flush with large amounts of water. Frequent or Prolonged Skin Contact - May cause irritation. Remove soiled clothing and wash skin with mild soap & water.

Inhalation - Remove exposed person to fresh air. If respiratory symptoms develop seek medical attention.

Ingestion - Do not induce vomiting. If conscious, give milk or water and seek medical attention.


SPECIAL PROTECTION INFORMATION --- SECTION V
Ventilation Required: None if airborne concentration us minimal.

Respiratory Protection: None if not exposed to mist.

Gloves/Glasses: Use impermeable gloves and safety goggles for repeated exposure or hot handling.


HANDLING OF SPILLS OR LEAKS --- SECTION VI
Spill Control Measure: Eliminate sources of ignition. Prevent additional discharge of material, if possible to do so safely. Contain and/or clean up with sand or earth on land - skimming absorbent on water.

Waste Disposal: Dispose of in accordance with all applicable federal, state, and local regulations. Wear personal protective equipment - gloves, goggles, etc.


SPECIAL PRECAUTIONS --- SECTION VII
Handling and Storage: Keep containers tightly closed. Store in cool, well ventilated place, away from heat and/or incompatible materials.


TRANSPORTATION DATA --- SECTION VIII
D.O.T.: Not regulated.

Freight Classification: Petroleum lubricating oil.


ENVIRONMENTAL/SAFETY REGULATIONS
This material contains the following chemicals subject to the reporting requirements of SARA 313 and 40 CFR 372:

%Component Weight
Zinc Compound 1-2%
Copper Compound 0-1%


Prepared By: Dell Findley
Title: Lab Technician
Original Date: June 30, 1996

We believe the statements, technical information, and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assume no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.

Lucas High Performance Semi-Synthetic ATF
[Stock #10052]

DIVISION AND LOCATION --- SECTION I

Division: Lucas Oil Products, Inc., 13365 Estelle Street, Corona, CA 91719

Emergency Telephone Number: 800-342-2512


CHEMICAL AND PHYSICAL PROPERTIES --- SECTION II
Chemical Name: Petroleum hydrocarbon plus additives.

Formula: Proprietary information.

Components: Petroleum distillates, hydrotreated paraffinic oils, lube oil additive containing functionalized dispersants, solvent extracted mineral oil.

Hazardous Components: None

Appearance: Liquid

Color: Clear red

Odor: Characteristic petroleum

Vapor Density (air = 1 ATM): Greater than air.

Boiling Point: >500°F.

Viscosity cSt @ 100°C: Greater than or equal to 7.5

Density @ 60° F: 7.462 pounds/gallon

Specific Gravity @ 60°F: .8756

Solubility in Water: Negligible @ 25°C.

Stability: Stable under normal conditions of storage and handling.

Incompatibility: Avoid contact with strong oxidizing agents.


FIRE AND EXPLOSION DATA --- SECTION III
Fire Fighting Procedures: Use dry chemical, carbon dioxide, halon, foam or water spray (fog).

Flash point: COC = 375°F.

Hazardous Decomposition Products: Fumes,smoke carbon monoxide, sulphur oxides and oxides of nitrogen.


HEALTH HAZARD DATA --- SECTION IV
Chronic Effects of Over-Exposure: Harmful if inhaled - avoid breathing oil mist.

Acute Toxicological Properties: No data available.

Emergency First Aid Procedures:

Eyes - Contact may cause irritation - flush with large amounts of water.

Skin - Frequent or prolonged skin contact may cause irritation. Remove soiled clothing and wash skin with mild soap & water.

Inhalation - Remove exposed person to fresh air. If respiratory symptoms develop seek medical attention.

Ingestion - Low order of toxicity (minimal). If conscious, give milk or water and seek medical attention. Do not induce vomiting.


SPECIAL PROTECTION INFORMATION --- SECTION V
Ventilation Required: None if airborne concentration us minimal.

Respiratory Protection: None if not exposed to mist.

Gloves/Glasses: Use impermeable gloves and safety goggles for repeated exposure or hot handling.


HANDLING OF SPILLS OR LEAKS --- SECTION VI
Spill Control Measure: Eliminate sources of ignition. Prevent additional discharge of material, if possible to do so safely. Contain and/or clean up with sand or earth on land - skimming absorbent on water.

Waste Disposal: Dispose of in accordance with all applicable federal, state, and local regulations. Wear personal protective equipment - gloves, goggles, etc.


SPECIAL PRECAUTIONS --- SECTION VII
Handling and Storage: Keep containers tightly closed. Store in cool, well ventilated place, away from heat and/or incompatible materials.


TRANSPORTATION DATA --- SECTION VIII
D.O.T.: Not regulated.

Freight Classification: Petroleum lubricating oil.


ENVIRONMENTAL/SAFETY REGULATIONS
This material does not contain any chemicals subject to the reporting requirements of Section 313 of Title III of the SARA 40 CFR Part 372:


Prepared By: Dell Findley
Title: Lab Technician
Original Date: June 30, 1996

We believe the statements, technical information, and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assume no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.

Lucas Racing 20/50 Plus
[Stock #20500]

DIVISION AND LOCATION --- SECTION I

Division: Lucas Oil Products, Inc., 13365 Estelle Street, Corona, CA 91719

Emergency Telephone Number: 800-342-2512


CHEMICAL AND PHYSICAL PROPERTIES --- SECTION II
Chemical Name: Petroleum hydrocarbon plus additives.

Formula: Proprietary information.

Components: Hydrotreated distillate, heavy paraffin, solvent dewaxed distillate, zinc, copper, calcium, and magnesium detergents.

Hazardous Components: Zinc, copper compounds. Oil mist if generated.

Appearance: Liquid

Color: Clear brown

Odor: Characteristic petroleum.

Vapor Density (air = 1 ATM): Greater than air.

Boiling Point: >500°F.

Viscosity cSt @ 100°C: Greater than or equal to 16.5

Density: 7.462 pounds/gallon

Specific Gravity @ 60°F: .8961

Solubility in Water: Negligible @ 25°C.

Stability: Stable under normal conditions of storage and handling.

Incompatibility: Avoid contact with strong oxidizing agents.


FIRE AND EXPLOSION DATA --- SECTION III
Fire Fighting Procedures: Use dry chemical, carbon dioxide, halon, foam or water spray.

Flash point: COC = 395°F.

Hazardous Decomposition Products: Combustion may yield fumes and smoke and oxides of carbon and oxides of nitrogen, phosphorus, sulphur, and zinc.


HEALTH HAZARD DATA --- SECTION IV
Chronic Effects of Over-Exposure: Harmful if inhaled - avoid breathing oil mist.

Acute Toxicological Properties: No data available.

Emergency First Aid Procedures:

Eyes - Eye irritant, may cause stinging, watering, redness, swelling: flush with large amounts of water. Frequent or Prolonged Skin Contact - May cause irritation. Remove soiled clothing and wash skin with mild soap & water.

Inhalation - Remove exposed person to fresh air. If respiratory symptoms develop seek medical attention.

Ingestion - Do not induce vomiting. If conscious, give milk or water and seek medical attention.


SPECIAL PROTECTION INFORMATION --- SECTION V
Ventilation Required: None if airborne concentration us minimal.

Respiratory Protection: None if not exposed to mist.

Gloves/Glasses: Use impermeable gloves and safety goggles for repeated exposure or hot handling.


HANDLING OF SPILLS OR LEAKS --- SECTION VI
Spill Control Measure: Eliminate sources of ignition. Prevent additional discharge of material, if possible to do so safely. Contain and/or clean up with sand or earth on land - skimming absorbent on water.

Waste Disposal: Dispose of in accordance with all applicable federal, state, and local regulations. Wear personal protective equipment - gloves, goggles, etc.


SPECIAL PRECAUTIONS --- SECTION VII
Handling and Storage: Keep containers tightly closed. Store in cool, well ventilated place, away from heat and/or incompatible materials.


TRANSPORTATION DATA --- SECTION VIII
D.O.T.: Not regulated.

Freight Classification: Petroleum lubricating oil.


ENVIRONMENTAL/SAFETY REGULATIONS
This material contains the following chemicals subject to the reporting requirements of SARA 313 and 40 CFR 372:

%Component Weight
Zinc Compound 1-2%
Copper Compound 0-1%


Prepared By: Dell Findley
Title: Lab Technician
Original Date: June 30, 1996

We believe the statements, technical information, and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assume no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.

Lucas 70 Plus Racing Oil
[Stock #20700]

DIVISION AND LOCATION --- SECTION I

Division: Lucas Oil Products, Inc., 13365 Estelle Street, Corona, CA 91719

Emergency Telephone Number: 800-342-2512


CHEMICAL AND PHYSICAL PROPERTIES --- SECTION II
Chemical Name: Petroleum hydrocarbon plus additives.

Formula: Proprietary information.

Components: Hydrotreated distillate, heavy paraffin, solvent dewaxed distillate, zinc, copper, calcium, and magnesium detergents.

Hazardous Components: Zinc, copper compounds. Oil mist if generated.

Appearance: Liquid

Color: Clear brown

Odor: Characteristic petroleum.

Vapor Density (air = 1 ATM): Greater than air.

Boiling Point: >500°F.

Viscosity cSt @ 100°C: Greater than or equal to 25.0

Density: 7.509 pounds/gallon

Specific Gravity @ 60°F: .9018

Solubility in Water: Negligible @ 25°C.

Stability: Stable under normal conditions of storage and handling.

Incompatibility: Avoid contact with strong oxidizing agents.


FIRE AND EXPLOSION DATA --- SECTION III
Fire Fighting Procedures: Use dry chemical, carbon dioxide, halon, foam or water spray.

Flash point: COC = 420°F.

Hazardous Decomposition Products: Combustion may yield fumes and smoke and oxides of carbon and oxides of nitrogen, phosphorus, sulphur, and zinc.


HEALTH HAZARD DATA --- SECTION IV
Chronic Effects of Over-Exposure: Harmful if inhaled - avoid breathing oil mist.

Acute Toxicological Properties: No data available.

Emergency First Aid Procedures:

Eyes - Eye irritant, may cause stinging, watering, redness, swelling: flush with large amounts of water. Frequent or Prolonged Skin Contact - May cause irritation. Remove soiled clothing and wash skin with mild soap & water.

Inhalation - Remove exposed person to fresh air. If respiratory symptoms develop seek medical attention.

Ingestion - Do not induce vomiting. If conscious, give milk or water and seek medical attention.


SPECIAL PROTECTION INFORMATION --- SECTION V
Ventilation Required: None if airborne concentration us minimal.

Respiratory Protection: None if not exposed to mist.

Gloves/Glasses: Use impermeable gloves and safety goggles for repeated exposure or hot handling.


HANDLING OF SPILLS OR LEAKS --- SECTION VI
Spill Control Measure: Eliminate sources of ignition. Prevent additional discharge of material, if possible to do so safely. Contain and/or clean up with sand or earth on land - skimming absorbent on water.

Waste Disposal: Dispose of in accordance with all applicable federal, state and local regulations. Wear personal protective equipment - gloves, goggles, etc.


SPECIAL PRECAUTIONS --- SECTION VII
Handling and Storage: Keep containers tightly closed. Store in cool, well ventilated place, away from heat and/or incompatible materials.


TRANSPORTATION DATA --- SECTION VIII
D.O.T.: Not regulated.

Freight Classification: Petroleum lubricating oil.


ENVIRONMENTAL/SAFETY REGULATIONS
This material contains the following chemicals subject to the reporting requirements of SARA 313 and 40 CFR 372:

%Component Weight
Zinc Compound 1-2%
Copper Compound 0-1%


Prepared By: Dell Findley
Title: Lab Technician
Original Date: Jan 30, 1996

We believe the statements, technical information, and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assume no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.

Lucas Heavy Duty 85/140 Gear Oils
[Stock #10042]

DIVISION AND LOCATION --- SECTION I

Division: Lucas Oil Products, Inc., 13365 Estelle Street, Corona, CA 91719

Emergency Telephone Number: 800-342-2512


CHEMICAL AND PHYSICAL PROPERTIES --- SECTION II
Chemical Name: Petroleum hydrocarbon plus additives.

Formula: Proprietary information.

Components: Hydrotreated distillate, heavy paraffin, solvent dewaxed distillate, olefin sulfide.

Hazardous Components: Oil mist if generated.

Appearance: Liquid

Color: Amber

Odor: Characteristic petroleum and strong additive.

Vapor Density (air = 1 ATM): Greater than air.

Boiling Point: > 500°F.

Viscosity cSt @ 100°C: Greater than or equal to 25.0.

Density: 7.500 pounds/gallon.

Specific Gravity @ 60°F: .9007

Solubility in Water: Negligible @ 25°C.

Stability: Stable under normal conditions of storage and handling.

Incompatibility: Avoid contact with strong oxidizing agents.


FIRE AND EXPLOSION DATA --- SECTION III
Fire Fighting Procedures: Use dry chemical, carbon dioxide, halon, foam or water spray.

Flash Point: COC = 435°F.

Hazardous Decomposition Products: Combustion may yield smoke, carbon monoxide, oxides of carbon, nitrogen, phosphorus and sulphur.


HEALTH HAZARD DATA --- SECTION IV
Chronic Effects of Over-Exposure: Harmful if inhaled - avoid breathing oil mist.

Acute Toxicological Properties: No data available.

Emergency First Aid Procedures:

Eyes - Eye irritant, may cause stinging, watering, redness, swelling: flush with large amounts of water. Frequent or Prolonged Skin Contact - May cause irritation. Remove soiled clothing and wash skin with mild soap & water.

Inhalation - Remove exposed person to fresh air. If respiratory symptoms develop seek medical attention.

Ingestion - Do not induce vomiting. If conscious, give milk or water and seek medical attention.


SPECIAL PROTECTION INFORMATION --- SECTION V
Ventilation Required: None if airborne concentration us minimal.

Respiratory Protection: None if not exposed to mist.

Gloves/Glasses: Use impermeable gloves and safety goggles for repeated exposure or hot handling.


HANDLING OF SPILLS OR LEAKS --- SECTION VI
Spill Control Measure: Eliminate sources of ignition. Prevent additional discharge of material, if possible to do so safely. Contain and/or clean up with sand or earth on land - skimming absorbent on water.

Waste Disposal: Dispose of in accordance with all applicable federal, state, and local regulations. Wear personal protective equipment - gloves, goggles, etc.


SPECIAL PRECAUTIONS --- SECTION VII
Handling and Storage: Keep containers tightly closed. Store in cool, well ventilated place, away from heat and/or incompatible materials.


TRANSPORTATION DATA --- SECTION VIII
D.O.T.: Not regulated.

Freight Classification: Petroleum lubricating oil.


ENVIRONMENTAL/SAFETY REGULATIONS
This product does not contain greater than 1.0% of any chemical substances listed under SARA section 313.


Prepared By: Dell Findley
Title: Lab Technician
Original Date: July 15, 1995

We believe the statements, technical information, and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assume no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.

Lucas Air Tool Lubricant
[Stock #10200, 10216 ]

DIVISION AND LOCATION --- SECTION I

Division: Lucas Oil Products, Inc., 13365 Estelle Street, Corona, CA 91719

Emergency Telephone Number: 800-342-2512


CHEMICAL AND PHYSICAL PROPERTIES --- SECTION II
Chemical Name: Petroleum hydrocarbon plus additives.

Formula: N/A

Hazardous Decomposition Products: Carbon monoxide and carbon dioxide from burning. Oxides of phosphorous from burning. Oxides of sulfur.

Incompatibility (keep away from): Strong oxidizers such as hydrogen peroxide, bromine, and chromic acid.

Toxic and Hazardous Ingredients: None

Form: Liquid

Odor: Petroleum

Appearance: Liquid

Color: Lt Amber

Specific Gravity (water = 1): .89

Boiling Point: Greater than 371°C (700°F).

Melting Point: -18°C (0°F).

Solubility in Water (by weight %): -0- @ 20°C.

Volatile (by weight %): -0-

Evaporation Rate: -0-

Vapor Pressure (mm Hg @ 20°C): -0-

Vapor Density (air = 1): N/A

pH (as is): N/A

Stability: Product is stable under normal conditions.

Viscosity cSt @ 100°F: Greater than or = to 40


FIRE AND EXPLOSION DATA --- SECTION III
Special Fire Fighting Procedures: Do not use water except as fog.

Unusual Fire and Explosion Hazards: None

Flashpoint: (Method used) Cleveland open cup - greater than 204°C (399°F).

Flammable Limits %: N/A

Extinguishing agent: Dry chemical, Waterfog, CO2, or Foam. Closed containers exposed to fire may be cooled with water.


HEALTH HAZARD DATA --- SECTION IV
Permissible Concentrations (air): If used in applications where a mist may be generated, observe a TWA/PEL of 5 mg/m3 for mineral oil mist (OSHA and ACGIH)

Chronic Effects of Over-Exposure: Prolonged or repeated skin contact may cause dermatitis (skin irritation).

Acute Toxicological Properties: No data available.

Emergency First Aid Procedures:

Eyes - Flush with large amounts of water for at lease 15 minutes. If irritation persists, call a physician.

Skin - Remove excess with cloth or paper. Wash thoroughly with soap and water.

Inhalation - Remove victim to fresh air. Call a physician.

If Swallowed - Contact a physician immediately.


SPECIAL PROTECTION INFORMATION --- SECTION V
Ventilation type required (local, mechanical, special): None

Respiratory protection (specify type): None

Protective gloves: Neoprene type

Eye protection: Chemical safety goggles

Other protective equipment: None


HANDLING OF SPILLS OF LEAKS --- SECTION VI
Procedures for Clean-Up: Transfer bulk of mixture into another container. Absorb residue with an inert material such as earth, sand, or vermiculite. Sweep up and dispose as solid waste in accordance with local, state, and federal regulations.

Waste Disposal: Dispose of in accordance with all applicable federal, state, and local regulations.


SPECIAL PRECAUTIONS --- SECTION VII
Precautions to be taken in handling and storage: Do not handle or store at temperatures over.....

Maximum Storage Temperature: 65°C (150°F).


TRANSPORTATION DATA --- SECTION VIII
D.O.T.: Not regulated

Reportable Quantity: N/A

Freight Classification: Petroleum lubricating oil

Special Transportation Notes: None


Prepared By: Dell Findley
Title: Lab Technician
Original Date: July 1, 1994

We believe the statements, technical information, and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assume no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.

Lucas Heavy Duty-High TBN 15/40 Long Drain Truck Oil
Product Code: 10075,10076,10077,10078

DIVISION AND LOCATION --- SECTION I
Division: Lucas Oil Products, Inc. • 302 North Sheridan Street • Corona, CA 92880-2067 Emer~ency Phone Number: (800) 342-2512

CHEMICAL AND PHYSICAL PROPERTIES --- SECTIONII

Chemical Name: Petroleum Hydrocarbon plus additives.
Formula: Proprietary information.
Components: Hydrotreated distillate, heavy paraffin, solvent dewaxed distillate, zinc compound,
calcium and magnesium detergent.
Hazardous Components: Zinc compound. Oil mist, if generated.
Appearance: Liquid.
Color: Clear brown.
Odor: Characteristic petroleum.
Vapor Density (air = 1 ATM): Greater than air. Boiling Point: >500°F.
Viscosity cSt (if? lOO°C: Greater than or equal to 13.5.
Density: 7.434 pounds/gallon.
Specific Gravity (if? 60°F: .8927
Solubility in Water: Negligible @ 25°C.
Stability: Stable under normal conditions of storage and handling.
Incompatibility: Avoid contact with strong oxidizing agents.

FIRE AND EXPLOSION DATA --- SECTION III

Fire Fighting: Use dry chemical, carbon dioxide, halon, foam or water spray. Flashpoint: COC = 375°.
Hazardous Decomposition Products: Combustion may yield fumes, smoke and oxides of carbon,
oxides of nitrogen, phosphorus, sulphur and zinc.

HEALTH HAZARD DATA --- SECTION IV

Chronic Effects of Over Exposure: Harmful if inhaled - avoid breathing oil mist.
Acute Toxicological Properties: No data available.
Emergency First Aid: Eyes = Eye irritant. May cause stinging, watering, redness, swelling.
Flush with large amounts of water.
Skin = Contact may cause mild irritation. Remove soiled clothing and wash skin with mild soap and water.
Inhalation = Remove exposed person to fresh air. If respiratory symptoms develop, seek medical attention.
Ingestion = Do not induce vomiting. If conscious, give milk or water and seek medical attention.

Page 2

SPECIAL PROTECTION INFORMATION --- SECTION V

Ventilation Required: None if airborne concentration minimal.
Respiratory Protection: None if not exposed to mist.
Gloves/Glasses: Use impermeable gloves and safety goggles for repeated, excess or hot handling.

HANDLING OF SPILLS OR LEAKS --- SECTION VI

Spill Control Measures: Eliminate sources of ignition. Prevent additional discharge of material, if possible to do so safely. Contain and/or clean up with sand or earth on
land - skimming absorbents on water.
Waste Disposal: Dispose of in accordance with all applicable federal, state and local regulations. 'Vear personal protective equipment - gloves, goggles, etc.


SPECIAL PRECAUTIONS --- SECTION VII

Handling and Storage: Keep containers tightly closed. Store in cool, well ventilated place away from heat and/or incompatible materials.

TRANSPORTATION DATA --- SECTION VIII

D.O.T: Not regulated.
Freight Classification: Petroleum lubrication oil.

ENVIRONMENTAL/SAFETY REGULATIONS -- SECTION IX

This product contains the following chemicals subject to the reporting requirements of SARA 313 and 40 CFR 372.
Component: Zinc Compound Weight: 1 - 2%

Prepared By: Dell Findley Title: Lab Technician Original Date: 07-15-95 Updated: 10-01-99

We believe the statements, technical information, and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assume no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.

Lucas Synthetic Heavy Duty Oil Stabilizer
Product Code: 10130, 10131, 10132, 10133, 10134
==============================================================================
DIVISION AND LOCATION --- SECTION I
==============================================================================
Division: Lucas Oil Products, Inc. • 302 North Sheridan Street • Corona, CA 92880-2067
Emergency Telephone Number: (800) 342-2512
==============================================================================
CHEMICAL AND PHYSICAL PROPERTIES --- SECTION II
==============================================================================
Chemical Name: Hydrocracked, Hydroisomerized High VI Paraffinic oils. Severely refined heavy Paraffinic distillates.
Formula: N/A
Hazardous Decomposition Products: Carbon monoxide and carbon dioxide from burning.
Incompatibility (keep away from): Strong oxidizers such as hydrogen peroxide, bromine, and chromic acid.
Toxic and Hazardous Ingredients: None
Form: Liquid Odor: Petroleum Appearance: Liquid Color: Light Straw
Specific Gravity (water = 1): .8560
Boiling Point: Greater than 371° C (700° F)
Melting Point: -18° C (0° F)
Solubility in Water (by weight %: -0- @ 20° C
Volatile (by weight %): -0-
Evaporation Rate: -0-
Vapor Pressure (mm Hg @ 20° C): -0-
Vapor Density (air = 1): N/A
pH (as is): N/A
Stability: Product is stable under normal conditions
Viscosity cSt @ 100° C: Greater than or = to 45.0
==============================================================================
FIRE AND EXPLOSION DATA --- SECTION III
==============================================================================
Special Fire Fighting Procedures (air): Do not use water except as fog
Unusual Fire and Explosion Hazards: None
Flashpoint: (Method Used) Cleveland open cup - greater than 193° C (380° F)
Flammable Limits%: N/A
Extinguishing Agent: Dry chemical, Waterfog, CO 2 or Foam
==============================================================================
HEALTH HAZARD DATA --- SECTION IV
==============================================================================
Permissible Concentrations (air): If used in applications where a mist may be generated, observe a TWA/PEL of 5 mg/m3 for mineral oil mist (OSHA and ACGIH).
Chronic Effects of Over-Exposure: Prolonged or repeated skin contact may cause dermatitis (skin irritation).
Acute Toxicological Properties: No data available.




Lucas Synthetic Heavy Duty Oil Stabilizer Page 2

Emergency First Aid Procedures:
Eyes: Flush with large amounts of water for a least 15 minutes. If irritation persists, call a physician.
Skin: Remove excess with cloth or paper. Wash thoroughly with soap and water.
Inhalation: Remove victim to fresh air. Call a physician.
Ingestion: Contact a physician immediately.
==============================================================================
SPECIAL PROTECTION INFORMATION --- SECTION V
==============================================================================
Ventilation type required (local, mechanical, special): None
Respiratory protection (specify type): None
Protective gloves: Neoprene type.
Eye protection: Chemical safety goggles.
Other protective equipment: None
==============================================================================
HANDLING OF SPILLS OF LEAKS --- SECTION VI
==============================================================================
Procedures for Clean-Up: Transfer bulk of mixture into another container. Absorb residue with an inert material such as earth, sand, or vermiculite. Sweep up and dispose as solid waste in accordance with local, state, and federal regulations.
Waste Disposal: Dispose of in accordance with all applicable federal, state and local regulations.
==============================================================================
SPECIAL PRECAUTIONS --- SECTION VII
==============================================================================
Precautions to be taken in handling and storage: Do not handle or store at temperatures over..........
Maximum Storage Temperature: 66° C (150° F).
==============================================================================
TRANSPORTATION DATA --- SECTION VII
==============================================================================
D.O.T: Not regulated
Reportable Quantity: N/A
Freight Classification: Petroleum lubricating oil.
Special Transportation Notes: None
==============================================================================
Prepared By: Dell Findley Title: Lab Technician Original Date: 04-27-04 Updated: 04-27-04
==============================================================================
We believe the statements, technical information, and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assume no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.

Lucas Red “N” Tacky #2
Product Code: 10005, 10027, 10028, 10029
==============================================================================
DIVISION AND LOCATION --- SECTION I
==============================================================================
Division: Lucas Oil Products, Inc. • 302 North Sheridan Street • Corona, CA 92880-2067
Emergency Telephone Number: (800) 342-2512
==============================================================================
CHEMICAL AND PHYSICAL PROPERTIES --- SECTION II
==============================================================================
Chemical Name: Petroleum hydrocarbon plus additives.
Formula: N/A
Hazardous Decomposition Products: Carbon monoxide and carbon dioxide from burning, oxides of phosphorous from burning, oxides of sulphur, hydrocloric acid on burning or decomposition, sulphur dioxides or hydrogen sulfide, depending upon decomposition conditions, zinc oxide, chlorocarbon.
Incompatibility (keep away from): Strong oxidizers such as hydrogen peroxide, bromine, and chromic acid.
Toxic and Hazardous Ingredients: None
Form: Semi-solid Odor: Mineral oil Appearance: Grease Color: Red
Specific Gravity (water = 1): @ room temperature .945
Boiling Point: Not applicable
Melting Point: Not applicable
Solubility in Water (by weight %: Negligible at 25°C.
Volatile (by weight %): Not applicable
Evaporation Rate: Not applicable
Vapor Pressure (mm Hg at 20°C): Not applicable
Vapor Density (air=1): Not applicable
pH (as is): Not applicable
Stability: Product is stable under normal conditions
Viscosity SUS at 100°F: Greater than or = to 100
==============================================================================
FIRE AND EXPLOSION DATA --- SECTION III
==============================================================================
Special Fire Fighting Procedures: Dense smoke. Fire fighters should wear an approved self-contained breathing apparatus. Do not use water except as fog.
Unusual Fire and Explosion Hazards: Dense smoke.
Flashpoint: (Method used) Cleveland open cup - greater than 160°C (320°F).
Extinguishing agent: Dry chemical or Waterfog or CO 2 or Foam or Sand/Earth. Water may cause frothing. Closed containers exposed to fire may be cooled with water.
==============================================================================
HEALTH HAZARD DATA --- SECTION IV
==============================================================================
Chronic Effects of Over-Exposure: None when used with good personal hygiene practices. May otherwise cause skin and eye irritation upon prolonged or repeated contact.
Acute Toxicological Properties: No data available





Lucas Red “N” Tacky #2 Page 2

Emergency First Aid Procedures:
Eyes: Flush with large amounts of water for at lease 15 minutes and call a physician.
Skin: Remove excess with cloth or paper. Wash thoroughly with soap and water.
Inhalation: Remove exposed person to fresh air, if discomfort is experienced while handling hot
product.
If Swallowed: Contact a physician immediately.
==============================================================================
SPECIAL PROTECTION INFORMATION --- SECTION V
==============================================================================
Ventilation type required (local, mechanical, special): NONE
Respiratory protection (specify type): NONE
Protective gloves: None
Eye protection: Chemical safety goggles and, if handled hot, full face shield.
Other protective equipment: None
==============================================================================
HANDLING OF SPILLS OF LEAKS --- SECTION VI
==============================================================================
Procedures for Clean-Up: Transfer bulk of mixture into another container. Absorb residue with an inert material such as earth, sand, or vermiculite. Sweep up and dispose as solid waste in accordance with local, state, and federal regulations.
Waste Disposal: Dispose of in accordance with all applicable federal, state, and logcal regulations.
==============================================================================
SPECIAL PRECAUTIONS --- SECTION VII
==============================================================================
Precautions to be taken in handling and storage: Keep container closed until ready for use.
==============================================================================
TRANSPORTATION DATA --- SECTION VIII
==============================================================================
D.O.T.: Not regulated
Reportable Quantity: Not applicable
Freight Classification: Petroleum Lubricating Grease
Special Transportation Notes: None
==============================================================================
ENVIRONMENTAL/SAFETY REGULATIONS --- SECTION IX
==============================================================================
Section 313 (Title III Superfund Amendment and Reauthorization Act):
This product does not contain any chemical subject to the reporting requirements of Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372.
==============================================================================
Prepared By: Dell Findley Title: Lab Technician Original Date: 7/11/86 Updated: 01-01-04
==============================================================================
We believe the statements, technical information, and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assume no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.

Lucas 80/90 Gear Lube
Product Code: 10043 & 10046, 10066, 10067, 10069
==================================================================
DIVISION AND LOCATION --- SECTION I
==================================================================
Division: Lucas Oil Products, Inc. • 302 North Sheridan Street • Corona, CA 92880-2067
Emergency Telephone Number: (800) 342-2512
==================================================================
CHEMICAL AND PHYSICAL PROPERTIES --- SECTION II
==================================================================
Chemical Name: Petroleum hydrocarbon plus additives.
Formula: Proprietary information.
Components: Hydrotreated distillate, heavy paraffin, solvent de-waxed distillate, olefin sulfide, antimony compound.
Hazardous Components: Oil mist if generated.
Appearance: Liquid Color: Clear red Odor: Petroleum and strong additive
Vapor Density (air = 1 ATM): Greater than air
Boiling Point: > 500 degrees F
Viscosity cSt @ 100 degrees C: Greater than or equal to 13.5
Density: 7.472 pounds/gallon
Specific Gravity @ 60 degrees F: .8973
Solubility in Water: Negligible @ 25 degrees C
Stability: Stable under normal conditions of storage and handling
Incompatibility: Avoid contact with strong oxidizing agents
==================================================================
FIRE AND EXPLOSION DATA --- SECTION III
==================================================================
Fire Fighting Procedures: Use dry chemical, carbon dioxide, halon, foam or water spray
Flash Point: COC = 395 degrees F
Hazardous Decomposition Products: Combustion may yield smoke, carbon monoxide, oxides of carbon, nitrogen, phosphorus and sulfur
==================================================================
HEALTH HAZARD DATA --- SECTION IV
==================================================================
Chronic Effects of Over-Exposure: Harmful if inhaled - avoid breathing oil mist
Acute Toxicological Properties: No data available
Emergency First Aid Procedures: Eyes - Eye irritant, may cause stinging, watering, redness, swelling: flush with large amounts of water
Frequent or Prolonged Skin Contact - May cause irritation. Remove soiled clothing and wash skin with mild soap & water
Inhalation - Remove exposed person to fresh air. If respiratory symptoms develop seek medical attention
Ingestion - Do not induce vomiting. If conscious, give milk or water and seek medical attention
Lucas 80/90 Gear Lube Page 2

==================================================================
SPECIAL PROTECTION INFORMATION --- SECTION V
==================================================================
Ventilation Required: None if airborne concentration us minimal
Respiratory Protection: None if not exposed to mist
Gloves/Glasses: Use impermeable gloves and safety goggles for repeated exposure or hot handling
==================================================================
HANDLING OF SPILLS OR LEAKS --- SECTION VI
==================================================================
Spill Control Measure: Eliminate sources of ignition. Prevent additional discharge of material, if possible to do so safely. Contain and/or clean up with sand or earth on land - skimming absorbent on water.
Waste Disposal: Dispose of in accordance with all applicable federal, state, and local regulations. Wear personal protective equipment - gloves, goggles, etc.
==================================================================
SPECIAL PRECAUTIONS --- SECTION VII
==================================================================
Handling and Storage: Keep containers tightly closed. Store in cool, well ventilated place, away from heat and/or incompatible materials.
==================================================================
TRANSPORTATION DATA --- SECTION VIII
==================================================================
D.O.T.: Not regulated.
Freight Classification: Petroleum lubricating oil.
==================================================================
ENVIRONMENTAL/SAFETY REGULATIONS
==================================================================
This product does not contain greater than 1.0% of any chemical substances listed under SARA section 313.
==================================================================
Prepared By: Dell Findley Title: Lab Technician Original Date: 07-15-95 Updated: 01-01-04
==================================================================
We believe the statements, technical information, and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assume no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.
==================================================================
This product comes in five gallon pails, 16 gallon kegs and 55 gallon drums.

Lucas 75/90 Synthetic Gear Oil
Product Code: 10047, 10048, 10072, 10073 & 10074
==================================================================
DIVISION AND LOCATION --- SECTION I
==================================================================
Division: Lucas Oil Products, Inc. • 302 North Sheridan Street • Corona, CA 92880-2067
Emergency Telephone Number: (800) 342-2512
==================================================================
CHEMICAL AND PHYSICAL PROPERTIES --- SECTION II
==================================================================
Chemical Name: Synthetic Petroleum hydrocarbon plus additives.
Formula: Proprietary information.
Components: Hydrocracked, Hydroisomorized/C-15/C-55 parafinic oils.
Hazardous Components: Oil mist if generated.
Appearance: Liquid Color: Light yellow/straw Odor: Petroleum and strong additive
Vapor Density (air = 1 ATM): Greater than air
Boiling Point: > 500 degrees F
Viscosity cSt @ 100 degrees C: Greater than or equal to 14.5
Density: 7.443 pounds/gallon
Specific Gravity @ 60 degrees F: .8939
Solubility in Water: Negligible @ 25 degrees C
Stability: Stable under normal conditions of storage and handling
Incompatibility: Avoid contact with strong oxidizing agents including peroxides chlorine & strong acids
==================================================================
FIRE AND EXPLOSION DATA --- SECTION III
==================================================================
Fire Fighting Procedures: Use dry chemical, carbon dioxide, halon, foam or water spray
Flash Point: COC = 385 degrees F
Hazardous Decomposition Products: Combustion may yield smoke, carbon monoxide, oxides of carbon, nitrogen, phosphorus and sulfur
NFPA Hazard ID: Health: 0 Flammability:1 Reactivity: 0
==================================================================
HEALTH HAZARD DATA --- SECTION IV
==================================================================
Chronic Effects of Over-Exposure: Harmful if inhaled - avoid breathing oil mist
Acute Toxicological Properties: No data available
Emergency First Aid Procedures: Eyes - Eye irritant, may cause stinging, watering, redness, swelling: flush with large amounts of water
Frequent or Prolonged Skin Contact - May cause irritation. Remove soiled clothing and wash skin with mild soap & water
Inhalation - Remove exposed person to fresh air. If respiratory symptoms develop seek medical attention
Lucas 75/90 Synthetic Gear Oil Page 2

Ingestion - Do not induce vomiting. If conscious, give milk or water and seek medical attention


==================================================================
SPECIAL PROTECTION INFORMATION --- SECTION V
==================================================================
Ventilation Required: Use in well ventilated area
Respiratory Protection: None if not exposed to mist and area well ventilated
Gloves/Glasses: Use impermeable gloves and safety goggles for repeated exposure or hot handling
==================================================================
HANDLING OF SPILLS OR LEAKS --- SECTION VI
==================================================================
Spill Control Measure: Eliminate sources of ignition. Prevent additional discharge of material, if possible to do so safely. Contain and/or clean up with sand or earth on land - skimming absorbent on water.
Waste Disposal: Dispose of in accordance with all applicable federal, state, and local regulations. Wear personal protective equipment - gloves, goggles, etc.
==================================================================
SPECIAL PRECAUTIONS --- SECTION VII
==================================================================
Handling and Storage: Keep containers tightly closed. Store in cool, well ventilated place, away from heat and/or incompatible materials.
==================================================================
TRANSPORTATION DATA --- SECTION VIII
==================================================================
D.O.T.: Not regulated.
Freight Classification: Petroleum lubricating oil.
==================================================================
ENVIRONMENTAL/SAFETY REGULATIONS
==================================================================
This product does not contain any chemical substances listed under SARA section 313.
==================================================================
Prepared By: Dell Findley Title: Lab Technician Original Date: 09-01-02 Updated: 01-01-04
==================================================================
We believe the statements, technical information, and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assume no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.
==================================================================
This product comes in five gallon pails, 16 gallon kegs and 55 gallon drums.

Lucas Synthetic 50wt. trans lubricant
Product Code: 10146, 10147, 10148, 10149
==================================================================
DIVISION AND LOCATION --- SECTION I
==================================================================
Division: Lucas Oil Products, Inc. • 302 North Sheridan Street • Corona, CA 92880-2067
Emergency Telephone Number: (800) 342-2512
==================================================================
CHEMICAL AND PHYSICAL PROPERTIES --- SECTION II
==================================================================
Chemical Name: Synthetic Petroleum hydrocarbon plus additives.
Formula: Proprietary information.
Components: Hydrocracked, Hydroisomorized/C-15/C-55 parafinic oils.
Hazardous Components: Oil mist if generated.
Appearance: Liquid Color: Off White Odor: Petroleum
Vapor Density (air = 1 ATM): Greater than air
Boiling Point: > 500 degrees F
Viscosity cSt @ 100 degrees C: Greater than or equal to 23.0
Density: 7.093 pounds/gallon
Specific Gravity @ 60 degrees F: .8519
Solubility in Water: Negligible @ 25 degrees C
Stability: Stable under normal conditions of storage and handling
Incompatibility: Avoid contact with strong oxidizing agents including peroxides chlorine & strong acids
==================================================================
FIRE AND EXPLOSION DATA --- SECTION III
==================================================================
Fire Fighting Procedures: Use dry chemical, carbon dioxide, halon, foam or water spray
Flash Point: COC = 385 degrees F
Hazardous Decomposition Products: Combustion may yield smoke, carbon monoxide, oxides of carbon, nitrogen, phosphorus and sulfur
NFPA Hazard ID: Health: 0 Flammability:1 Reactivity: 0
==================================================================
HEALTH HAZARD DATA --- SECTION IV
==================================================================
Chronic Effects of Over-Exposure: Harmful if inhaled - avoid breathing oil mist
Acute Toxicological Properties: No data available
Emergency First Aid Procedures: Eyes - Eye irritant, may cause stinging, watering, redness, swelling: flush with large amounts of water
Frequent or Prolonged Skin Contact - May cause irritation. Remove soiled clothing and wash skin with mild soap & water
Inhalation - Remove exposed person to fresh air. If respiratory symptoms develop seek medical attention
Lucas Synthetic 50wt. trans lubricant Page 2

Ingestion - Do not induce vomiting. If conscious, give milk or water and seek medical attention


==================================================================
SPECIAL PROTECTION INFORMATION --- SECTION V
==================================================================
Ventilation Required: Use in well ventilated area
Respiratory Protection: None if not exposed to mist and area well ventilated
Gloves/Glasses: Use impermeable gloves and safety goggles for repeated exposure or hot handling
==================================================================
HANDLING OF SPILLS OR LEAKS --- SECTION VI
==================================================================
Spill Control Measure: Eliminate sources of ignition. Prevent additional discharge of material, if possible to do so safely. Contain and/or clean up with sand or earth on land - skimming absorbent on water.
Waste Disposal: Dispose of in accordance with all applicable federal, state, and local regulations. Wear personal protective equipment - gloves, goggles, etc.
==================================================================
SPECIAL PRECAUTIONS --- SECTION VII
==================================================================
Handling and Storage: Keep containers tightly closed. Store in cool, well ventilated place, away from heat and/or incompatible materials.
==================================================================
TRANSPORTATION DATA --- SECTION VIII
==================================================================
D.O.T.: Not regulated.
Freight Classification: Petroleum lubricating oil.
==================================================================
ENVIRONMENTAL/SAFETY REGULATIONS
==================================================================
This product does not contain any chemical substances listed under SARA section 313.
==================================================================
Prepared By: Dell Findley Title: Lab Technician Original Date: 09-01-04 Updated: 01-01-05
==================================================================
We believe the statements, technical information, and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assume no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.
==================================================================
This product comes in five gallon pails, 16 gallon kegs and 55 gallon drums.

Lucas Synthetic 50wt. trans lubricant
Product Code: 10146, 10147, 10148, 10149
==================================================================
DIVISION AND LOCATION --- SECTION I
==================================================================
Division: Lucas Oil Products, Inc. • 302 North Sheridan Street • Corona, CA 92880-2067
Emergency Telephone Number: (800) 342-2512
==================================================================
CHEMICAL AND PHYSICAL PROPERTIES --- SECTION II
==================================================================
Chemical Name: Synthetic Petroleum hydrocarbon plus additives.
Formula: Proprietary information.
Components: Hydrocracked, Hydroisomorized/C-15/C-55 parafinic oils.
Hazardous Components: Oil mist if generated.
Appearance: Liquid Color: Off White Odor: Petroleum
Vapor Density (air = 1 ATM): Greater than air
Boiling Point: > 500 degrees F
Viscosity cSt @ 100 degrees C: Greater than or equal to 23.0
Density: 7.093 pounds/gallon
Specific Gravity @ 60 degrees F: .8519
Solubility in Water: Negligible @ 25 degrees C
Stability: Stable under normal conditions of storage and handling
Incompatibility: Avoid contact with strong oxidizing agents including peroxides chlorine & strong acids
==================================================================
FIRE AND EXPLOSION DATA --- SECTION III
==================================================================
Fire Fighting Procedures: Use dry chemical, carbon dioxide, halon, foam or water spray
Flash Point: COC = 385 degrees F
Hazardous Decomposition Products: Combustion may yield smoke, carbon monoxide, oxides of carbon, nitrogen, phosphorus and sulfur
NFPA Hazard ID: Health: 0 Flammability:1 Reactivity: 0
==================================================================
HEALTH HAZARD DATA --- SECTION IV
==================================================================
Chronic Effects of Over-Exposure: Harmful if inhaled - avoid breathing oil mist
Acute Toxicological Properties: No data available
Emergency First Aid Procedures: Eyes - Eye irritant, may cause stinging, watering, redness, swelling: flush with large amounts of water
Frequent or Prolonged Skin Contact - May cause irritation. Remove soiled clothing and wash skin with mild soap & water
Inhalation - Remove exposed person to fresh air. If respiratory symptoms develop seek medical attention
Lucas Synthetic 50wt. trans lubricant Page 2

Ingestion - Do not induce vomiting. If conscious, give milk or water and seek medical attention


==================================================================
SPECIAL PROTECTION INFORMATION --- SECTION V
==================================================================
Ventilation Required: Use in well ventilated area
Respiratory Protection: None if not exposed to mist and area well ventilated
Gloves/Glasses: Use impermeable gloves and safety goggles for repeated exposure or hot handling
==================================================================
HANDLING OF SPILLS OR LEAKS --- SECTION VI
==================================================================
Spill Control Measure: Eliminate sources of ignition. Prevent additional discharge of material, if possible to do so safely. Contain and/or clean up with sand or earth on land - skimming absorbent on water.
Waste Disposal: Dispose of in accordance with all applicable federal, state, and local regulations. Wear personal protective equipment - gloves, goggles, etc.
==================================================================
SPECIAL PRECAUTIONS --- SECTION VII
==================================================================
Handling and Storage: Keep containers tightly closed. Store in cool, well ventilated place, away from heat and/or incompatible materials.
==================================================================
TRANSPORTATION DATA --- SECTION VIII
==================================================================
D.O.T.: Not regulated.
Freight Classification: Petroleum lubricating oil.
==================================================================
ENVIRONMENTAL/SAFETY REGULATIONS
==================================================================
This product does not contain any chemical substances listed under SARA section 313.
==================================================================
Prepared By: Dell Findley Title: Lab Technician Original Date: 09-01-04 Updated: 01-01-05
==================================================================
We believe the statements, technical information, and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assume no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.
==================================================================
This product comes in five gallon pails, 16 gallon kegs and 55 gallon drums.

Lucas High Performance Synthetic 5 Racing Oil
Product Number: 10105
==============================================================================
DIVISION AND LOCATION --- SECTION I
==============================================================================
Division: Lucas Oil Products, Inc.; 302 N. Sheridan st. Corona, Ca. 92880
Emergency Telephone Number: 1800 342-2515
==============================================================================
CHEMICAL AND PHYSICAL PROPERTIES --- SECTION II
==============================================================================
Chemical Name: Petroleum hydrocarbon plus additives.
Formula: Proprietary information.
Components: Hydrocracked, hydroisomerized, Hydrotreated, C-15, C-55, high viscosity index paraffinic oils, zinc, calcium, and magnesium detergents.
Hazardous Components: Zinc compounds. Oil mist if generated.
Appearance: Liquid. Color: Clear brown Odor: Characteristic petroleum.
Vapor Density (air = 1 ATM): Greater than air.
Boiling Point: >500°F.
Viscosity cSt @ 100°C: Greater than or equal to 5.0
Density: 7.137 pounds/gallon
Specific Gravity @ 60°F: .8571
Solubility in Water: Negligible @ 25°C.
Stability: Stable under normal conditions of storage and handling.
Incompatibility: Avoid contact with strong oxidizing agents.
==============================================================================
FIRE AND EXPLOSION DATA --- SECTION III
==============================================================================
Fire Fighting Procedures: Use dry chemical, carbon dioxide, halon, foam or water spray.
Flash point: COC = 385°F.
Hazardous Decomposition Products: Combustion may yield fumes and smoke and oxides of carbon and oxides of nitrogen, phosphorus, sulphur, and zinc.
==============================================================================
HEALTH HAZARD DATA --- SECTION IV
==============================================================================Chronic Effects of Over-Exposure: Harmful if inhaled - avoid breathing oil mist.
Acute Toxicological Properties: No data available.
Emergency First Aid Procedures:
Eyes - Eye irritant, may cause stinging, watering, redness, swelling: flush with large amounts of water. Frequent or Prolonged Skin Contact - May cause irritation. Remove soiled clothing and wash skin with mild soap & water.
Inhalation - Remove exposed person to fresh air. If respiratory symptoms develop seek medical attention.
Ingestion - Do not induce vomiting. If conscious, give milk or water and seek medical attention.






Lucas High Performance Synthetic 5 Racing Oil Page 2

==============================================================================
SPECIAL PROTECTION INFORMATION --- SECTION V
==============================================================================
Ventilation Required: None if airborne concentration us minimal.
Respiratory Protection: None if not exposed to mist.
Gloves/Glasses: Use impermeable gloves and safety goggles for repeated exposure or hot handling.
==============================================================================
HANDLING OF SPILLS OR LEAKS --- SECTION VI
==============================================================================
Spill Control Measure: Eliminate sources of ignition. Prevent additional discharge of material, if possible to do so safely. Contain and/or clean up with sand or earth on land - skimming absorbent on water.
Waste Disposal: Dispose of in accordance with all applicable federal, state, and local regulations. Wear personal protective equipment - gloves, goggles, etc.
==============================================================================
SPECIAL PRECAUTIONS --- SECTION VII
==============================================================================
Handling and Storage: Keep containers tightly closed. Store in cool, well ventilated place, away from heat and/or incompatible materials.
==============================================================================
TRANSPORTATION DATA --- SECTION VIII
==============================================================================
D.O.T.: Not regulated. Freight Classification: Petroleum lubricating oil.
==============================================================================
ENVIRONMENTAL/SAFETY REGULATIONS
==============================================================================
This material contains the following chemicals subject to the reporting requirements of SARA 313 and 40 CFR 372:
%Component Weight
Zinc Compound 1 - 2 %
==============================================================================
Prepared By: John Campbell Title: Director Original Date: 06-30-96 Updated: 04-19-04
==============================================================================
We believe the statements, technical information, and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assume no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.

Lucas High Performance 5 W- 20 Synthetic Racing Oil
Product Number: 10082, 10083 & 10084
==============================================================================
DIVISION AND LOCATION --- SECTION I
==============================================================================
Division: Lucas Oil Products, Inc. • 302 North Sheridan Street • Corona, CA 92880
Emergency Telephone Number: (800) 342-2512
==============================================================================
CHEMICAL AND PHYSICAL PROPERTIES --- SECTION II
==============================================================================
Chemical Name: Petroleum hydrocarbon plus additives.
Formula: Proprietary information.
Components: Hydrocracked, hydroisomerized, C-15, C-55, high viscosity index paraffinic oils, zinc, calcium, and magnesium detergents.
Hazardous Components: Zinc compounds. Oil mist if generated.
Appearance: Liquid. Color: Clear brown Odor: Characteristic petroleum.
Vapor Density (air = 1 ATM): Greater than air.
Boiling Point: >500°F.
Viscosity cSt @ 100°C: Greater than or equal to 7.0
Density: 7.163 pounds/gallon
Specific Gravity @ 60°F: .8602
Solubility in Water: Negligible @ 25°C.
Stability: Stable under normal conditions of storage and handling.
Incompatibility: Avoid contact with strong oxidizing agents.
==============================================================================
FIRE AND EXPLOSION DATA --- SECTION III
==============================================================================
Fire Fighting Procedures: Use dry chemical, carbon dioxide, halon, foam or water spray.
Flash point: COC = 380°F.
Hazardous Decomposition Products: Combustion may yield fumes and smoke and oxides of carbon and oxides of nitrogen, phosphorus, sulphur, and zinc.
==============================================================================
HEALTH HAZARD DATA --- SECTION IV
==============================================================================Chronic Effects of Over-Exposure: Harmful if inhaled - avoid breathing oil mist.
Acute Toxicological Properties: No data available.
Emergency First Aid Procedures:
Eyes - Eye irritant, may cause stinging, watering, redness, swelling: flush with large amounts of water. Frequent or Prolonged Skin Contact - May cause irritation. Remove soiled clothing and wash skin with mild soap & water.
Inhalation - Remove exposed person to fresh air. If respiratory symptoms develop seek medical attention.
Ingestion - Do not induce vomiting. If conscious, give milk or water and seek medical attention.






Lucas High Performance 5 W 20 Synthetic Racing Oil Page 2

==============================================================================
SPECIAL PROTECTION INFORMATION --- SECTION V
==============================================================================
Ventilation Required: None if airborne concentration us minimal.
Respiratory Protection: None if not exposed to mist.
Gloves/Glasses: Use impermeable gloves and safety goggles for repeated exposure or hot handling.
==============================================================================
HANDLING OF SPILLS OR LEAKS --- SECTION VI
==============================================================================
Spill Control Measure: Eliminate sources of ignition. Prevent additional discharge of material, if possible to do so safely. Contain and/or clean up with sand or earth on land - skimming absorbent on water.
Waste Disposal: Dispose of in accordance with all applicable federal, state, and local regulations. Wear personal protective equipment - gloves, goggles, etc.
==============================================================================
SPECIAL PRECAUTIONS --- SECTION VII
==============================================================================
Handling and Storage: Keep containers tightly closed. Store in cool, well ventilated place, away from heat and/or incompatible materials.
==============================================================================
TRANSPORTATION DATA --- SECTION VIII
==============================================================================
D.O.T.: Not regulated. Freight Classification: Petroleum lubricating oil.
==============================================================================
ENVIRONMENTAL/SAFETY REGULATIONS
==============================================================================
This material contains the following chemicals subject to the reporting requirements of SARA 313 and 40 CFR 372:
%Component Weight
Zinc Compound 1 - 2 %
==============================================================================
Prepared By: Dell Findley Title: Lab Technician Original Date: 06-30-96 Updated: 01-01-04
==============================================================================
We believe the statements, technical information, and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assume no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.

Lucas 30 Plus Racing Oil
Product Number: 10053
==============================================================================
DIVISION AND LOCATION --- SECTION I
==============================================================================
Division: Lucas Oil Products, Inc. • 302 North Sheridan Street • Corona, CA 92880-2067
Emergency Telephone Number: (800) 342-2512
==============================================================================
CHEMICAL AND PHYSICAL PROPERTIES --- SECTION II
==============================================================================
Chemical Name: Petroleum hydrocarbon plus additives.
Formula: Proprietary information.
Components: Hydrotreated distillate, heavy paraffin, solvent dewaxed distillate, zinc, copper, calcium, and magnesium detergents.
Hazardous Components: Zinc, copper compounds. Oil mist if generated.
Appearance: Liquid. Color: Clear brown Odor: Characteristic petroleum.
Vapor Density (air = 1 ATM): Greater than air.
Boiling Point: >500°F.
Viscosity cSt @ 100°C: Greater than or equal to 16.5
Density: 7.462 pounds/gallon
Specific Gravity @ 60°F: .8961
Solubility in Water: Negligible @ 25°C.
Stability: Stable under normal conditions of storage and handling.
Incompatibility: Avoid contact with strong oxidizing agents.
==============================================================================
FIRE AND EXPLOSION DATA --- SECTION III
==============================================================================
Fire Fighting Procedures: Use dry chemical, carbon dioxide, halon, foam or water spray.
Flash point: COC = 395°F.
Hazardous Decomposition Products: Combustion may yield fumes and smoke and oxides of carbon and oxides of nitrogen, phosphorus, sulphur, and zinc.
==============================================================================
HEALTH HAZARD DATA --- SECTION IV
==============================================================================Chronic Effects of Over-Exposure: Harmful if inhaled - avoid breathing oil mist.
Acute Toxicological Properties: No data available.
Emergency First Aid Procedures:
Eyes - Eye irritant, may cause stinging, watering, redness, swelling: flush with large amounts of water. Frequent or Prolonged Skin Contact - May cause irritation. Remove soiled clothing and wash skin with mild soap & water.
Inhalation - Remove exposed person to fresh air. If respiratory symptoms develop seek medical attention.
Ingestion - Do not induce vomiting. If conscious, give milk or water and seek medical attention.





Lucas 30 Plus Racing Oil Page 2

==============================================================================
SPECIAL PROTECTION INFORMATION --- SECTION V
==============================================================================
Ventilation Required: None if airborne concentration us minimal.
Respiratory Protection: None if not exposed to mist.
Gloves/Glasses: Use impermeable gloves and safety goggles for repeated exposure or hot handling.
==============================================================================
HANDLING OF SPILLS OR LEAKS --- SECTION VI
==============================================================================
Spill Control Measure: Eliminate sources of ignition. Prevent additional discharge of material, if possible to do so safely. Contain and/or clean up with sand or earth on land - skimming absorbent on water.
Waste Disposal: Dispose of in accordance with all applicable federal, state, and local regulations. Wear personal protective equipment - gloves, goggles, etc.
==============================================================================
SPECIAL PRECAUTIONS --- SECTION VII
==============================================================================
Handling and Storage: Keep containers tightly closed. Store in cool, well ventilated place, away from heat and/or incompatible materials.
==============================================================================
TRANSPORTATION DATA --- SECTION VIII
==============================================================================
D.O.T.: Not regulated. Freight Classification: Petroleum lubricating oil.
==============================================================================
ENVIRONMENTAL/SAFETY REGULATIONS
==============================================================================
This material contains the following chemicals subject to the reporting requirements of SARA 313 and 40 CFR 372:
%Component Weight
Zinc Compound 1 - 2 %
Copper Compound 0 - 1 %
==============================================================================
Prepared By: Dell Findley Title: Lab Technician Original Date: 06-30-96 Updated: 01-01-04
We believe the statements, technical information, and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assume no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.

Lucas High Performance 20w-50 Synthetic Racing Oil Product Number: 10054
==============================================================================
DIVISION AND LOCATION --- SECTION I
==============================================================================
Division: Lucas Oil Products, Inc. • 302 North Sheridan Street • Corona, CA 92880-2067
Emergency Telephone Number: (800) 342-2512
==============================================================================
CHEMICAL AND PHYSICAL PROPERTIES --- SECTION II
==============================================================================
Chemical Name: Petroleum hydrocarbon plus additives.
Formula: Proprietary information.
Components: Hydrocracked, Hydroisomeized, Hydrotreated zinc, copper, calcium, and magnesium detergents, C-15, C-55 High viscosity index paraffinic oils.
Hazardous Components: Zinc, copper compounds. Oil mist if generated.
Appearance: Liquid. Color: Clear brown Odor: Characteristic petroleum.
Vapor Density (air = 1 ATM): Greater than air.
Boiling Point: >500°F.
Viscosity cSt @ 100°C: Greater than or equal to 16.5
Density: 7.198 pounds/gallon
Specific Gravity @ 60°F: .8644
Solubility in Water: Negligible @ 25°C.
Stability: Stable under normal conditions of storage and handling.
Incompatibility: Avoid contact with strong oxidizing agents.
==============================================================================
FIRE AND EXPLOSION DATA --- SECTION III
==============================================================================
Fire Fighting Procedures: Use dry chemical, carbon dioxide, halon, foam or water spray.
Flash point: COC = 425°F.
Hazardous Decomposition Products: Combustion may yield fumes and smoke and oxides of carbon and oxides of nitrogen, phosphorus, sulphur, and zinc.
==============================================================================
HEALTH HAZARD DATA --- SECTION IV
==============================================================================Chronic Effects of Over-Exposure: Harmful if inhaled - avoid breathing oil mist.
Acute Toxicological Properties: No data available.
Emergency First Aid Procedures:
Eyes - Eye irritant, may cause stinging, watering, redness, swelling: flush with large amounts of water. Frequent or Prolonged Skin Contact - May cause irritation. Remove soiled clothing and wash skin with mild soap & water.
Inhalation - Remove exposed person to fresh air. If respiratory symptoms develop seek medical attention.
Ingestion - Do not induce vomiting. If conscious, give milk or water and seek medical attention.





Lucas High Performance 20w50 Synthetic Racing Oil Page 2

==============================================================================
SPECIAL PROTECTION INFORMATION --- SECTION V
==============================================================================
Ventilation Required: None if airborne concentration us minimal.
Respiratory Protection: None if not exposed to mist.
Gloves/Glasses: Use impermeable gloves and safety goggles for repeated exposure or hot handling.
==============================================================================
HANDLING OF SPILLS OR LEAKS --- SECTION VI
==============================================================================
Spill Control Measure: Eliminate sources of ignition. Prevent additional discharge of material, if possible to do so safely. Contain and/or clean up with sand or earth on land - skimming absorbent on water.
Waste Disposal: Dispose of in accordance with all applicable federal, state, and local regulations. Wear personal protective equipment - gloves, goggles, etc.
==============================================================================
SPECIAL PRECAUTIONS --- SECTION VII
==============================================================================
Handling and Storage: Keep containers tightly closed. Store in cool, well ventilated place, away from heat and/or incompatible materials.
==============================================================================
TRANSPORTATION DATA --- SECTION VIII
==============================================================================
D.O.T.: Not regulated. Freight Classification: Petroleum lubricating oil.
==============================================================================
ENVIRONMENTAL/SAFETY REGULATIONS
==============================================================================
This material contains the following chemicals subject to the reporting requirements of SARA 313 and 40 CFR 372:
%Component Weight
Zinc Compound 1 - 2 %
Copper Compound 0 - 1 %
==============================================================================
Prepared By: Dell Findley Title: Lab Technician Original Date: 06-30-96 Updated: 04-28-04
We believe the statements, technical information, and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assume no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.

Lucas Octane Booster Product Code: 10026
==============================================================================
DIVISION AND LOCATION --- SECTION I
==============================================================================
Division: Lucas Oil Products, Inc. • 302 North Sheridan Street • Corona, CA 92880-2067
Emergency Telephone Number: (800) 342-2512
==============================================================================
CHEMICAL AND PHYSICAL PROPERTIES --- SECTION II
=============================================================================
Chemical Name: Petroleum distillates, Hydrotreated Paraffinic, Naphthenic Solvent
Formula: N/A
Hazardous Decomposition Products: Carbon monoxide and carbon dioxide from burning. Oxides from burning.
Incompatibility (keep away from): Strong oxidizers such as hydrogen peroxide, bromine, and chromic acid.
Toxic and Hazardous Ingredients: Methylcyclopentadienyl solvent
Form: Liquid Odor: Petroleum/Solvent plus additives Appearance: Liquid Color: Light straw
Specific Gravity: .8702 @ 60o F
Boiling Point: Greater than 223° C (433° F)
Solubility in Water (by weight %: -0- @ 20° C.
Volatile (by weight %): -0-
Evaporation Rate: -0-
Vapor Pressure (mm Hg @ 20° C): -0-
Vapor Density (air = 1): N/A
pH (as is): N/A
Stability: Product is stable under normal conditions
Viscosity cSt @ 100 degrees C: Greater than or = to 5.0
==============================================================================
FIRE AND EXPLOSION DATA --- SECTION III
==============================================================================
Special Fire Fighting Procedures (air): Do not use water except as fog
Unusual Fire and Explosion Hazards: None
Flashpoint: (Method Used) Cleveland open cup - greater than 89° C (192° F)
Flammable Limits%: N/A
Extinguishing Agent: Dry chemical, Waterfog, CO 2 or Foam. Closed containers exposed to fire may be cooled with water.
==============================================================================
HEALTH HAZARD DATA --- SECTION IV
==============================================================================
Permissible Concentrations (air): If used in applications where a mist may be generated, observe a TWA/PEL of 5 mg/m3 for mineral oil mist (OSHA and ACGIH).
Chronic Effects of Over-Exposure: Prolonged or repeated skin contact may cause dermatitis (skin irritation).
Acute Toxicological Properties: No data available.



Lucas Octane Booster
Page 2
Emergency First Aid Procedures:
Eyes: Flush with large amounts of water for a least 15 minutes. If irritation persists, call a physician.
Skin: Remove excess with cloth or paper. Wash thoroughly with soap and water.
Inhalation: Remove victim to fresh air. Call a physician.
Ingestion: Contact a physician immediately.
==============================================================================SPECIAL PROTECTION INFORMATION --- SECTION V
==============================================================================
Ventilation type required (local, mechanical, special): None
Respiratory protection (specify type): None
Protective gloves: Neoprene type.
Eye protection: Chemical safety goggles.
Other protective equipment: None
==============================================================================
HANDLING OF SPILLS OF LEAKS --- SECTION VI
==============================================================================
Procedures for Clean-Up: Transfer bulk of mixture into another container. Absorb residue with an inert material such as earth, sand, or vermiculite. Sweep up and dispose as solid waste in accordance with local, state, and federal regulations.
Waste Disposal: Dispose of in accordance with all applicable federal, state and local regulations.
==============================================================================
SPECIAL PRECAUTIONS --- SECTION VII
==============================================================================
Precautions to be taken in handling and storage: Do not handle or store at temperatures over..........
Maximum Storage Temperature: 100° C (212° F).
==============================================================================
TRANSPORTATION DATA --- SECTION VIII
==============================================================================
D.O.T: Not regulated
Reportable Quantity: N/A
Freight Classification: Petroleum lubricating oil.
Special Transportation Notes: None
==============================================================================
Prepared By: Dell Findley Title: Lab Technician Original Date: 04-28-04 Updated: 04-28-04
==============================================================================
We believe the statements, technical information, and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assume no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.
==============================================================================

Lucas Synthetic 75/140 Trans&Diff Lube Product Code: 10121
LUCAS MATERIAL SAFETY DATA SHEET

Lucas 75/140 Synthetic Gear Oil Product Code: 10121, 10122, 10123, 10124 & 10139
==================================================================
DIVISION AND LOCATION --- SECTION I
==================================================================
Division: Lucas Oil Products, Inc. • 302 North Sheridan Street • Corona, CA 92880-2067
Emergency Telephone Number: (800) 342-2512
==================================================================
CHEMICAL AND PHYSICAL PROPERTIES --- SECTION II
==================================================================
Chemical Name: Synthetic Petroleum hydrocarbon plus additives.
Formula: Proprietary information.
Components: Hydrocracked, Hydroisomorized/C-15/C-55 parafinic oils.
Hazardous Components: Oil mist if generated.
Appearance: Liquid Color: Light yellow/straw Odor: Petroleum and strong additive
Vapor Density (air = 1 ATM): Greater than air
Boiling Point: > 500 degrees F
Viscosity cSt @ 100 degrees C: Greater than or equal to 29
Density: 7.184 pounds/gallon
Specific Gravity @ 60 degrees F: .8628
Solubility in Water: Negligible @ 25 degrees C
Stability: Stable under normal conditions of storage and handling
Incompatibility: Avoid contact with strong oxidizing agents including peroxides chlorine & strong acids
==================================================================
FIRE AND EXPLOSION DATA --- SECTION III
==================================================================
Fire Fighting Procedures: Use dry chemical, carbon dioxide, halon, foam or water spray
Flash Point: COC = 389 degrees F
Hazardous Decomposition Products: Combustion may yield smoke, carbon monoxide, oxides of carbon, nitrogen, phosphorus and sulfur
NFPA Hazard ID: Health: 0 Flammability:1 Reactivity: 0
==================================================================
HEALTH HAZARD DATA --- SECTION IV
==================================================================
Chronic Effects of Over-Exposure: Harmful if inhaled - avoid breathing oil mist
Acute Toxicological Properties: No data available
Emergency First Aid Procedures: Eyes - Eye irritant, may cause stinging, watering, redness, swelling: flush with large amounts of water
Frequent or Prolonged Skin Contact - May cause irritation. Remove soiled clothing and wash skin with mild soap & water
Inhalation - Remove exposed person to fresh air. If respiratory symptoms develop seek medical attention
Lucas 75/140 Synthetic Gear Oil Page 2

Ingestion - Do not induce vomiting. If conscious, give milk or water and seek medical attention


==================================================================
SPECIAL PROTECTION INFORMATION --- SECTION V
==================================================================
Ventilation Required: Use in well ventilated area
Respiratory Protection: None if not exposed to mist and area well ventilated
Gloves/Glasses: Use impermeable gloves and safety goggles for repeated exposure or hot handling
==================================================================
HANDLING OF SPILLS OR LEAKS --- SECTION VI
==================================================================
Spill Control Measure: Eliminate sources of ignition. Prevent additional discharge of material, if possible to do so safely. Contain and/or clean up with sand or earth on land - skimming absorbent on water.
Waste Disposal: Dispose of in accordance with all applicable federal, state, and local regulations. Wear personal protective equipment - gloves, goggles, etc.
==================================================================
SPECIAL PRECAUTIONS --- SECTION VII
==================================================================
Handling and Storage: Keep containers tightly closed. Store in cool, well ventilated place, away from heat and/or incompatible materials.
==================================================================
TRANSPORTATION DATA --- SECTION VIII
==================================================================
D.O.T.: Not regulated.
Freight Classification: Petroleum lubricating oil.
==================================================================
ENVIRONMENTAL/SAFETY REGULATIONS
==================================================================
This product does not contain any chemical substances listed under SARA section 313.
==================================================================
Prepared By: Dell Findley Title: Lab Technician Original Date: 09-08-04 Updated: 2-01-05
==================================================================
We believe the statements, technical information, and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assume no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.
==================================================================
This product comes in five gallon pails, 16 gallon kegs and 55 gallon drums.

Lucas Semi-Synthetic 2-Cycle Oil Product Code: 10110

LUCAS MATERIAL SAFETY DATA SHEET

1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Lucas Semi-Synthetic 2-Cycle Racing Oil
PRODUCT NUMBER(S): 10110, 10115, 10120, 10125

COMPANY IDENTIFICATION
Lucas Oil Products, Inc.
302 North Sheridan Street
Corona, CA 92880
2. COMPOSITION/INFORMATION ON INGREDIENTS
100.0%
CONTAINING
COMPONENTS AMOUNT LIMIT/QTY AGENCY/TYPE

LUBRICATING Synthetic BASE OIL CONTAINING ONE OR MORE OF THE FOLLOWING
Ø 70.0%
SOLVENT DEWAXED RESIDUAL OIL
Chemical Name: RESIDUAL OILS SOLVENT DEWAXED
CAS64742627 5 mg/m3 (mist) ACGIH TWA
10 mg/m3 (mist) ACGIH STEL
5 mg/m3 (mist) OSHA PEL
HYDROTREATED BOTTOMS
Chemical Name: RESIDUAL OILS HYDROTREATED
CA564742570 5 mq/m3 (mist) ACGIH TWA
10 mg/m3 (mist) ACGIH STEL
5 mg/m3 (mist) OSHA PEL
HYDROTREATED DIST., HVY PARA
Chemical Name: DISTILLATES, HYDROTREATED HEAVY PARAFFINIC
CAS64742547 5 mg/m3 (mist) ACGIH TWA
10 mg/m3 (mist) ACGIN STEL
5 mg/m3 (mist) OSHA PEL

SOLVENT DEWAXED DIST., HVY PAR
Chemical Name: DISTILLATES, SOLVENT DEWAXED HEAVY PARAFFINIC
CAS6474265O 5 mg/m3 (mist) ACGIH TWA
10 mg/m3 (mist) ACGIR STEL
5 mg/m3 (mist) OSHA PEL
HYDROTREATED, DISTILLATE, LT.
Chemical Name: DISTILLATES, HYDROTREATED LIGHT
CAS64742478 < 15.0%

ADDITIVES < 15.0



COMPOSITION COMMENT:
All the components of this material are on the Toxic Substances Control Act Chemical Substances Inventory.

This product fits the ACGIH definition for mineral oil mist. The ACGIR TLV is 5 mg/m3, the OSHA PEL is 5 mg/m3.

TLV - Threshold Limit Value TWA - Time Weighted Average
STEL - Short-term Exposure Limit TPQ - Threshold Planning Quantity
RQ - Reportable Quantity PEL - Permissible Exposure Limit
C - Ceiling Limit CAS - Chemical Abstract Service Number
Al-5 - Appendix A Categories () - Change Has Been Proposed
3. HAZARDS IDENTIFICATION
« « « « « « « « « « « « « EMERGENCY OVERVIEW « « « « « « « « « « « « «
¡ MAY CAUSE EYE IRRITATION
¡ COMBUSTIBLE
¡ KEEP OUT OF REACH OF CHILDREN
« « « « « « « « « « « « « « « « « « « « « « « « « « « « « « « « « « « « «

POTENTIAL HEALTH EFFECTS

EYE:
This substance is slightly irritating to the eyes and could cause prolonged (days) impairment of your vision. The degree of the injury will depend on the amount 0£ material that gets into the eye and the speed and thoroughness of the first aid treatment.
SKIN:
This substance is not expected to cause prolonged or significant skin irritation. The systemic toxicity of this substance has not been determined. However, it should be practically non-toxic to internal organs if it gets on the skin. This hazard evaluation is based on data from similar materials.
INGESTION:
The systemic toxicity of this substance has not been determined. However, it should be practically non-toxic to internal organs if swallowed. This hazard evaluation is based on data from similar materials.
INHALATION:
Prolonged breathing of vapors can cause central nervous system effects. This hazard evaluation is based on data from similar materials,
SIGNS AND SYMPTOMS OF EXPOSURE:
EYE: May include pain, tears, swelling, redness, and blurred vision.
INHALATION: Central nervous system effects may include one or more of following: headache, dizziness, loss of appetite, weakness and loss of coordination.

4. FIRST AID MEASURESEYE:
Flush eyes immediately with fresh water for at least 15 minutes while holding the eyelids open. Remove contact lenses if worn. No additional first aid should be necessary. However, if irritation persists, see a doctor.
SKIN:
No first aid procedures are required. As a precaution, wash skin thoroughly with soap and water. Remove and wash contaminated clothing.

INGESTION:
If swallowed, give water or milk to drink and telephone for medical advice. DO NOT make person vomit unless directed to do so by medical personnel. If medical advice cannot be obtained, then take the person and product container to the nearest medical emergency treatment center or hospital.
INHALATION:
If any signs or symptoms as described in this document occur, move the person to fresh air. If any of these effects continue, see a doctor.
5. FIRE FIGHTING MEASURES
FLAMMABLE PROPERTIES
FLASH POINT: P-M 145ºF (63ºC)
AUTOIGNITION: NDA
FLAMMABILITY LIMITS (% by volume in air): Lower: NDA Upper: NDA
EXTINGUISHING MEDIA:
C02, Dry Chemical. Foam, Water Fog
NFPA RATINGS: Health 1; Flammability 2; Reactivity 0.
FIRE FIGHTING INSTRUCTIONS:
For fires involving this material, do not enter any enclosed or confined fire space without proper protective equipment, including self-contained breathing apparatus. Liquid evaporates and forms vapor (fumes) which can catch fire and burn with explosive violence. Invisible vapor spreads easily and can be set on fire by many sources such as pilot lights, welding equipment, and electrical motors and switches. Fire hazard is greater as liquid temperature rises above 85ºF.
COMBUSTION PRODUCTS:
Normal combustion forms carbon dioxide and water vapor; incomplete combustion can produce carbon monoxide.
6. ACCIDENTAL RELEASE MEASURES
CHEMTREC EMERGENCY NUMBER (24 hr); (800)424-9300 or (202)483-7616
ACCIDENTAL RELEASE MEASURES:
Certain geographical areas have air pollution restrictions concerning the use of materials in work situations which may release volatile components to the atmosphere. Air pollution regulations should be studied to determine if this material is regulated in the area where it is to be used.

Stop the source of the leak or release. Clean up releases as soon as possible. Contain liquid to prevent further contamination of soil, surface water or groundwater. Clean up small spills using appropriate techniques such as sorbent materials or pumping. Where feasible and appropriate, remove contaminated soil. Follow prescribed procedures for reporting and responding to larger releases.
7. HANDLING AND STORAGE
HANDLING AND STORAGE
DO NOT weld, heat or drill container. Residue may ignite with explosive violence if heated sufficiently. CAUTION Do not use pressure to empty drum or drum may rupture with explosive force. READ AND OBSERVE ALL PRECAUTIONS ON PRODUCT LABEL.

DO NOT USE OR STORE near flame, sparks or hot surfaces. USE ONLY IN WELL VENTILATED AREA. Keep container closed.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
PERSONAL PROTECTIVE EQUIPMENT
EYE/FACE PROTECTION:
Do not get this material in your eyes. Eye contact can be avoided by wearing chemical goggles.
SKIN PROTECTION:
No special skin protection is usually necessary. Avoid prolonged or frequently repeated skin contact with this material. Skin contact can be minimized by wearing protective clothing.
RESPIRATORY PROTECTION:
No special respiratory protection is normally required. However, it operating conditions create airborne concentrations which exceed the recommended exposure standards, the use of an approved respirator is required.
ENGINEERING CONTROLS:
Use adequate ventilation to keep the airborne concentrations of this material below the recommended exposure standard.
9. PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL DESCRIPTION: NDA
pH: NDA
VAPOR PRESSURE: NDA
VAPOR DENSITY (AIR=1): MA
BOILING POINT: NDA
FREEZING POINT: NDA
MELTING POINT: NA
SOLUBILITY: Soluble in hydrocarbon solvents: insoluble in water.
SPECIFIC GRAVITY: 0.87
EVAPORATION RATE: NA
VISCOSITY: 265 SUS @ 100ºF
PERCENT VOLATILE (VOL):NDA
10. STABILITY AND REACTIVITY
HAZARDOUS DECOMPOSITION PRODUCTS:
NDA
CHEMICAL STABILITY:
Stable.
CONDITIONS TO AVOID:
No data available.
INCOMPATIBILITY WITH OTHER MATERIALS:
May react with strong oxidizing agents, such as chlorates, nitrates, peroxides, etc.
HAZARDOUS POLYMERIZATION:
Polymerization will not occur.
11. TOXICOLOGICAL INFORMATION
EYE EFFECTS:
No product toxicology data available. The hazard evaluation was based on data on the components.
SKIN EFFECTS:
No product toxicology data available. The hazard evaluation was based on data on the components.
ACUTE ORAL EFFECTS:
No product toxicology data available. The hazard evaluation was based on data from similar materials.
ACUTE INHALATION EFFECTS:
No product toxicology data available. The hazard evaluation was based on data from similar materials.
ADDITIONAL TOXICOLOGY INFORMATION:
This product contains petroleum base oils which may be refined by various processes including severe solvent extraction, severe hydrocracking, or severe hydrotreating. None of the oils requires a cancer warning under the OSHA Hazard Communication Standard (29 CFR 1910.1200). These oils have not been listed in the National Toxicology Program (NTP) Annual Report nor have they been classified by the International Agency for Research on Cancer (IARC) as: carcinogenic to humans (Group 1) , probably carcinogenic to humans (Group 2A) or possibly carcinogenic to humans (Group 2B).
12. ECOLOGICAL INFORMATION
ECOTOXICITY: No data available.
ENVIRONMENTAL FATE: No data available.
13. DISPOSAL CONSIDERATIONS
DISPOSAL CONSIDERATIONS:
Oil collection services and collection centers are available for used motor oil recycling or disposal. Some service stations, automotive service centers, and retailers provide motor oil collection facilities.

Place contaminated materials in containers and dispose of in a manner consistent with applicable regulations. Contact your sales representative or local environmental or health authorities for approved disposal or recycling methods.
14. TRANSPORT INFORMATION
The description shown may not apply to all shipping situations. Consult 49CFR, or appropriate Dangerous Goods Regulations, for additional description requirements (e.g., technical name) and mode-specific or quantity-specific shipping requirements.

DOT SHIPPING NAME: PETROLEUM OIL
DOT HAZARD CLASS: COMBUSTIBLE LIQUID
DOT IDENTIFICATION NUMBER: UN1270
DOT PACKING GROUP: III
15. REGULATORY INFORMATION
SARA 311 CATEGORIES:
1. Immediate (Acute) Health Effects: YES
2. Delayed (Chronic) Health Effects: NO
3. Fire Hazard: NO
4. Sudden Release of Pressure Hazard: NO
5. Reactivity Hazard: NO

NEW JERSEY RTK CLASSIFICATION:
Under the New Jersey Right-to-Know Act L. 1983 Chapter 315 N.J.S.A. 34:5A-l et. seq., the product is to be identified as follows:
CAS# 64742627 RESIDUAL OILS SOLVENT DEWAXED
CAS# 64742570 HYDROTREATED BOTTOMS
CAS# 64742547 HYDROTREATED HEAVY PARAFFINIC DISTILLATES
CAS# 64742650 DISTILLATES, SOLVENT DEWAXED HEAVY PARAFFINIC
New Jersey Right-to-Know trade secret registry number 01154100-5023P
16. OTHER INFORMATION
NFPA RATINGS: Health 1; Flammability 2; Reactivity 0; (Least-O, Slight-l, Moderate-2, High-3, Extreme-4). These values are obtained using the guidelines or published evaluations prepared by the National Fire Protection Association (NFPA) or the National Paint and Coating Association (for HMIS ratings).

REVISION STATEMENT
Revises Section 8 (Exposure Controls/Personal Protection), Section 13 (Disposal Consideration), and Section 14 (Transport Information).
« « « « « « « « « « « « « « «« « « « « « « « « « « « « « « « « « « « « «
The above information is based on the data of which we are aware and is believed to be correct as of the date hereof. Since this information may be applied under conditions beyond our control and with which we may be unfamiliar and since data made available subsequent to the date hereof may suggest modification of the information, we do not assume any responsibility for the results of its use. This information is furnished upon condition that the person receiving it shall make his own determination of the suitability of the material for his particular purpose.
==============================================================================
Prepared By: Dell Findley Title: Lab Technician Original Date: 06-30-96 Updated: 01-01-04
==============================================================================
We believe the statements, technical information, and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assume no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.

Lucas Semi-Synthetic 10w-40 Racing Oil Product Code: 10176


LUCAS MATERIAL SAFETY DATA SHEET

Lucas Synthetic 0w-30 Racing Oil Product Code: 10179



Lucas Synthetic 5w-30 Motor Oil Product Code: 10049

Sort By:
Home  ·  Shopping Cart  ·  Products  ·  Trucking  ·  Automotive  ·  Contact Us  ·  Shipping Policy  ·  FAQ's  ·  Testimonials  ·  Automotive Products  ·  Boat  ·  Racing Only Oils  ·  Motorcycle  ·  Privacy Policy
Credit Card Online Payments

CC

trusted

Copyright 2002 Berry Enterprises
some material contained herein is copyrighted by Lucas Oil Products, Inc. used by permission.
Email: bob@bylucasoil.com
Last Modified: Friday, July 21, 2015